Search
Search results
-
Constraint Files - Constraint Basics
Each line in a constraint file is referred to as a constraint group, since it applies one or more constraint requirements to an ... Record=Constraint | TargetKind=Part | TargetId=XC2S300E-6PQ208C This constraint targets the part (or FPGA component), in this ...
admin - 11/06/2013 - 09:09
-
Constraint Files - Constraint Basics
Each line in a constraint file is referred to as a constraint group, since it applies one or more constraint requirements to an ... Record=Constraint | TargetKind=Part | TargetId=XC2S300E-6PQ208C This constraint targets the part (or FPGA component), in this ...
admin - 09/13/2017 - 15:32
-
Constraint File Reference
... and pin electrical properties are not stored in these source files, they are stored in separate constraint files. One or more constraint files can be mapped to an FPGA project ...
admin - 08/23/2019 - 14:29
-
Constraint File Reference
... and pin electrical properties are not stored in these source files, they are stored in separate constraint files. One or more constraint files can be mapped to an FPGA project ...
admin - 11/06/2013 - 09:09
-
Constraint File Reference
... and pin electrical properties are not stored in these source files, they are stored in separate constraint files. One or more constraint files can be mapped to an FPGA project ...
admin - 09/13/2017 - 15:32
-
Moving to Altium Designer from Pads Logic and PADS Layout
... and PADS® Layout™ designs, including PCB, Schematic files and library files can all be handled by Altium Designer's Import Wizard. ... rules are accessed from a single dialog - the PCB Rules and Constraint Editor. There are 10 rule categories that cover all respective ...
admin - 01/08/2015 - 18:25
-
Moving to Altium Designer from Pads Logic and PADS Layout
... and PADS® Layout™ designs, including PCB, Schematic files and library files can all be handled by Altium Designer's Import Wizard. ... rules are accessed from a single dialog - the PCB Rules and Constraint Editor. There are 10 rule categories that cover all respective ...
admin - 09/13/2017 - 15:32
-
Moving to Altium Designer from Mentor Graphics DxDesigner
... DxDesigner® designs, including schematics and library files can all be directly imported by having Altium Designer's Import Wizard ... Double-clicking on any rule while in the PCB Rules and Constraint Editor dialog will bring up the specific query for that rule in the ...
admin - 11/06/2013 - 05:11
-
Moving to Altium Designer from PADS Layout and OrCAD capture
... Translating complete PADS Layout® designs, including PCB files and library files can all be handled by Altium Designer's Import Wizard. ... Double-clicking on any rule while in the PCB Rules and Constraint Editor dialog will bring up the specific query for that rule in the ...
admin - 11/06/2013 - 05:11
-
Moving to Altium Designer from Mentor Graphics DxDesigner
... DxDesigner® designs, including schematics and library files can all be directly imported by having Altium Designer's Import Wizard ... Double-clicking on any rule while in the PCB Rules and Constraint Editor dialog will bring up the specific query for that rule in the ...
admin - 09/13/2017 - 15:32