Search
Search results
-
Schematic Processes
... Location.X Integer Specified in coordinate units of .01 inch. Range is 0-6500 Location.Y Integer Specified in coordinate units of .01 inch. Range is 0-6500 Orientation ...
admin - 11/06/2013 - 09:09
-
Coordinate
... Parent page: Objects A placed Coordinate. Summary A coordinate is a group design object. It is used to mark the X (horizontal) and ...
admin - 11/19/2013 - 08:09
-
Coordinate
... Parent page: Objects A placed Coordinate. Summary A coordinate is a group design object. It is used to mark the X (horizontal) and ...
admin - 09/13/2017 - 15:32
-
Explode Coordinate To Free Primitives
... Applied parameters: Action=Explode | Object=Coordinate Summary This command is used for converting a coordinate object back to its original set of primitive parts. After ...
admin - 11/06/2013 - 09:54
-
Explode Coordinate To Free Primitives
... Applied parameters: Action=Explode | Object=Coordinate Summary This command is used for converting a coordinate object back to its original set of primitive parts. After ...
admin - 09/13/2017 - 15:32
-
Coordinate
... Parent page: PCB Dialogs The Coordinate Dialog. Summary This dialog allows the designer to specify properties for Coordinate object. Access The Coordinate dialog can be accessed ...
admin - 11/06/2013 - 09:54
-
Coordinate
... Parent page: PCB Dialogs The Coordinate Dialog. Summary This dialog allows the designer to specify properties for Coordinate object. Access The Coordinate dialog can be accessed ...
admin - 09/13/2017 - 15:32
-
PCB Processes
... then use the following parameters; Object (Component, Coordinate, Dimension, Polygon) Object Component, Coordinate, Dimension, Polygon By default, free selected primitives are ...
admin - 11/06/2013 - 09:09
-
Testpoint Report Setup
... this option to output coordinates in millimeters Coordinate Position Reference to absolute origin - Use the ...
admin - 01/29/2015 - 18:52
-
Component
... of the component footprint. X-Location - X coordinate of the component. Y-Location - Y coordinate of the component. Type - Indicate component type. ...
admin - 11/06/2013 - 09:54