Search
Search results
-
Custom Logic Tutorial - Targeting the Design to the FPGA Device
... the design will ultimately be programmed and run. For this tutorial, we will target an FPGA device located on a 3-connector daughter board that is plugged into the Desktop NanoBoard NB2DSK01. ...
admin - 01/22/2014 - 19:31
-
Custom Logic Tutorial - Targeting the Design to the FPGA Device
... the design will ultimately be programmed and run. For this tutorial, we will target an FPGA device located on a 3-connector daughter board that is plugged into the Desktop NanoBoard NB2DSK01. ...
admin - 09/13/2017 - 15:32
-
Tutorial - Designing Custom FPGA Logic using C
Altium Designer provides the ability to add custom logic to an FPGA design, where that logic is 'captured' in an underlying C ...
admin - 07/16/2014 - 11:54
-
Tutorial - Designing Custom FPGA Logic using C
Altium Designer provides the ability to add custom logic to an FPGA design, where that logic is 'captured' in an underlying C ...
admin - 09/13/2017 - 15:32
-
Tutorial - Getting Started with FPGA Design
... of design hierarchy within an FPGA project, including simple custom logic (HDL). Virtual instrumentation. The example design ...
admin - 01/29/2016 - 17:12
-
Tutorial - Getting Started with FPGA Design
... of design hierarchy within an FPGA project, including simple custom logic (HDL). Virtual instrumentation. The example design ...
admin - 09/13/2017 - 15:32
-
Tutorial - Getting Started with the Innovation Station
... a CS4270 24-bit, 192kHz stereo audio CODEC (from Cirrus Logic). The CODEC caters for both analog and digital audio I/O. The Audio ... own peripheral boards. Alternatively you can go for a fully custom PCB solution that makes selective use of existing NanoBoard circuit ...
admin - 01/29/2016 - 17:09
-
Tutorial - Getting Started with the Innovation Station
... a CS4270 24-bit, 192kHz stereo audio CODEC (from Cirrus Logic). The CODEC caters for both analog and digital audio I/O. The Audio ... own peripheral boards. Alternatively you can go for a fully custom PCB solution that makes selective use of existing NanoBoard circuit ...
admin - 09/13/2017 - 15:32
-
Mapping the FPGA Design to the Device Pins
... By mapping internal digital signals to the device pins, your logic is able to communicate to other areas of your product. As part of this ... Constraint File Reference Moving to a Custom Board Once you have your FPGA design (and associated embedded ...
admin - 01/23/2014 - 13:59
-
Mapping the FPGA Design to the Device Pins
... By mapping internal digital signals to the device pins, your logic is able to communicate to other areas of your product. As part of this ... Constraint File Reference Moving to a Custom Board Once you have your FPGA design (and associated embedded ...
admin - 09/13/2017 - 15:32