Search
Search results
-
Hole To Hole Clearance
... or overlapping pad / via holes. There is also a flag to allow stacked microvias or not. To summarize, this rule: Flags ... performance improves due to a shorter pathway. Hole To Hole Clearance - Set a clearance constraint between holes, the ...
admin - 02/27/2014 - 07:23
-
Hole To Hole Clearance
... or overlapping pad / via holes. There is also a flag to allow stacked microvias or not. To summarize, this rule: Flags ... performance improves due to a shorter pathway. Hole To Hole Clearance - Set a clearance constraint between holes, the ...
admin - 09/13/2017 - 15:32
-
New Rule - Hole to Hole Clearance
... or overlapping pad / via holes. There is also a flag to allow stacked microvias or not (as shown below). Technical Reference Hole to Hole Clearance See the feature in Action Hole to Hole ...
admin - 11/06/2013 - 09:29
-
New Rule - Hole to Hole Clearance
... or overlapping pad / via holes. There is also a flag to allow stacked microvias or not (as shown below). Technical Reference Hole to Hole Clearance See the feature in Action Hole to Hole ...
admin - 09/13/2017 - 15:32
-
Add Stitching to Net
... PCB Dialogs The Add Via Stitching to Net Dialog. Summary Via stitching is a technique used to tie ... settings. Diameters Simple - Via Style(Hole size and diameter) is the same through all layers. Hole size ...
admin - 11/06/2013 - 09:54
-
Support for Rectangular Pad Holes
Adding to Altium Designer's pad hole options of round, square and slotted definitions, the new Altium Designer 15 release includes enhanced hole support through the addition of Rectangular shaped holes. ...
admin - 09/13/2017 - 15:32
-
Testpoint Clearance Check
The ability to configure any pad or via to function as a testpoint is a valuable feature ... test between each testpoint and every solder-exposed thru-hole pad and via on the board - delivering an extremely comprehensive test of ... the specification of the minimum allowed Distance to Pad Hole Centers and Distance to Via Hole Centers . Configuring the ...
phil.loughhead@... - 11/29/2016 - 17:22
-
Board Shape
... board. Summary The board shape, also referred to as the board outline, is a closed polygon that defines the boundary, or ... When Using Board Cutouts section. Cutting a Hole in the Board Shape A board cutout can be placed anywhere in the board ...
admin - 10/14/2016 - 17:02
-
Release Notes for Altium Designer Version 15.1
... Test Point Clearance Check Solder Mask Expansion from Hole Board Outline Clearance Checking Schematic Symbol Generation ... 2016 7492 Restored the ability to edit holes in the Hole Size Editor mode of the PCB panel. ...
admin - 09/13/2017 - 15:32
-
Release Notes for Altium Designer Version 15.1
... Test Point Clearance Check Solder Mask Expansion from Hole Board Outline Clearance Checking Schematic Symbol Generation ... 2016 7492 Restored the ability to edit holes in the Hole Size Editor mode of the PCB panel. ...
Anonymous - 06/03/2016 - 02:10