Search
Search results
-
Linked FPGA-PCB Project Changes - Pin Swapping in the PCB Document
... routing and then these changes back-annotated to the FPGA project, to keep the two projects synchronized. Use the following linked pages to learn how pin swap changes are made on the PCB document and how ...
admin - 01/23/2014 - 14:20
-
Linked FPGA-PCB Project Changes - Pin Swapping in the PCB Document
... routing and then these changes back-annotated to the FPGA project, to keep the two projects synchronized. Use the following linked pages to learn how pin swap changes are made on the PCB document and how ...
admin - 09/13/2017 - 15:32
-
Linked FPGA-PCB Project Changes - Pin Swapping in the FPGA Project
Pin swaps initiated from the FPGA project are likely to be required when a design no longer fits within the FPGA ... this file will update the constraints as necessary. The changes made to the constraint file now need to be pushed back to the PCB ... now reflects the pin assignment differences between the linked projects. Click on the Update To PCB button to push the ...
admin - 01/23/2014 - 14:24
-
Linked FPGA-PCB Project Changes - Pin Swapping in both PCB and FPGA Projects
It may be that pin changes have been made in both the PCB project and FPGA project without a synchronize occurring. If this is the case, ... the FPGA Workspace Map dialog will show the Schematic-FGPA Project link out of date (Red). Clicking on the link will open the ...
admin - 01/23/2014 - 14:25
-
Linked FPGA-PCB Project Changes - Pin Swapping in both PCB and FPGA Projects
It may be that pin changes have been made in both the PCB project and FPGA project without a synchronize occurring. If this is the case, ... the FPGA Workspace Map dialog will show the Schematic-FGPA Project link out of date (Red). Clicking on the link will open the ...
admin - 09/13/2017 - 15:32
-
Linked FPGA-PCB Project Changes - Pin Swapping in the FPGA Project
Pin swaps initiated from the FPGA project are likely to be required when a design no longer fits within the FPGA ... this file will update the constraints as necessary. The changes made to the constraint file now need to be pushed back to the PCB ... now reflects the pin assignment differences between the linked projects. Click on the Update To PCB button to push the ...
admin - 09/13/2017 - 15:32
-
An Overview of Electronic Product Development in Altium Designer
... on the board. Each electrical pad in my design is linked to at least one net companion by a connection line. This ratsnest of ... Optimizing the FPGA pinout Main article: Linked FPGA-PCB Project Changes - Pin Swapping in the PCB Document I am getting ...
admin - 09/13/2017 - 15:32