Search
Search results
-
Mapping the FPGA Design to the Device Pins
... FPGA Development Board? How do I Hook up the JTAG Chains in my Target System? How do I Link and Sync my FPGA and PCB Projects? Mapping is a method by which your design can be interfaced to the physical pins ...
admin - 01/23/2014 - 13:59
-
Specifying the Device and Mapping the FPGA Pins
Having made the physical connections required to interface your development board to the Altium Designer Software, you can now prepare an FPGA design so it can be programmed into the target FPGA. To do this you need ... physical device. Specifying the target device and mapping the nets in the FPGA design to pins on the device is done in Constraint ...
admin - 01/23/2014 - 13:52
-
Mapping the FPGA Design to the Device Pins
... FPGA Development Board? How do I Hook up the JTAG Chains in my Target System? How do I Link and Sync my FPGA and PCB Projects? Mapping is a method by which your design can be interfaced to the physical pins ...
admin - 09/13/2017 - 15:32
-
Specifying the Device and Mapping the FPGA Pins
Having made the physical connections required to interface your development board to the Altium Designer Software, you can now prepare an FPGA design so it can be programmed into the target FPGA. To do this you need ... physical device. Specifying the target device and mapping the nets in the FPGA design to pins on the device is done in Constraint ...
admin - 09/13/2017 - 15:32
-
Following a Signal Trail - NB2DSK01 Constraint Example
Perhaps the most useful way to illustrate the NB2DSK01 constraint system is by example. To highlight the mapping involved between each constituent part of the system, we will follow ... auto-configuration feature (see NB2DSK01 - Configuring an FPGA Project Automatically ), the configuration NB2DSK01_08_DB30_06 will ...
admin - 11/06/2013 - 05:35
-
Following a Signal Trail - NB2DSK01 Constraint Example
Perhaps the most useful way to illustrate the NB2DSK01 constraint system is by example. To highlight the mapping involved between each constituent part of the system, we will follow ... auto-configuration feature (see NB2DSK01 - Configuring an FPGA Project Automatically ), the configuration NB2DSK01_08_DB30_06 will ...
admin - 09/13/2017 - 15:32
-
JTAG Viewer
The following content has been imported from Legacy Help systems and is in the ... The pin states panel associated with a physical FPGA device provides information concerning the mapping of interface ports in the source FPGA design to the physical pins of ...
admin - 11/06/2013 - 09:54
-
FPGA Design
... Altera MegaWizard IP in Altium Designer? Use the following links to browse through the frequently asked questions relevant ... the Devices view, and choosing the Configure JTAG ID Mapping command. The Generic JTAG Device dialog will appear. ...
admin - 01/23/2014 - 18:26
-
Third Party Boards - Direct Connection using a Third Party Parallel Cable
... using Altium's USB JTAG Adapter (or through a NanoBoard) is the simplest method of interfacing Altium Designer with your development board, ... port are used to implement the two JTAG chains. Mapping the JTAG Chains to the Parallel Port Pins With respect to the Hard ...
admin - 09/13/2017 - 15:32
-
Third Party Boards - Direct Connection using a Third Party Parallel Cable
... using Altium's USB JTAG Adapter (or through a NanoBoard) is the simplest method of interfacing Altium Designer with your development board, ... port are used to implement the two JTAG chains. Mapping the JTAG Chains to the Parallel Port Pins With respect to the Hard ...
admin - 01/23/2014 - 13:48