Search

Search results

  1. NB2DSK01 - Board Communications

    ... – commonly referred to as JTAG. The Desktop NanoBoard NB2DSK01 is connected to your PC using either a USB or parallel connection. ... presents three JTAG chains, which collectively show all JTAG-compliant devices attached to the system on the nominated port (or ports). ...

    admin - 11/06/2013 - 05:35

  2. NB2DSK01 - Board Communications

    ... – commonly referred to as JTAG. The Desktop NanoBoard NB2DSK01 is connected to your PC using either a USB or parallel connection. ... presents three JTAG chains, which collectively show all JTAG-compliant devices attached to the system on the nominated port (or ports). ...

    admin - 09/13/2017 - 15:32

  3. Peripheral Board 1-Wire Communications

    The NB2DSK01 provides a 1-Wire® serial bus ( ONE_WIRE_DB_PB ), which is connected from its daughter board connector through to each of its peripheral board connectors. This ...

    admin - 02/06/2014 - 23:19

  4. Updating the Firmware on the Desktop NanoBoard NB2DSK01

    The Desktop NanoBoard NB2DSK01 uses a Xilinx Spartan-3 device (XC3S1500-4FG676C) as the controller for the board. Referred to as the NB2DSK01 - NanoTalk Controller , this device ...

    admin - 11/06/2013 - 05:35

  5. NanoBoard SPI Communications - Interface Wiring

    Related articles: NB2DSK01 SPI System Overview , NanoBoard 3000 SPI System Overview Accessing an SPI-compatible resource from within an FPGA design is most easily accomplished by ... ( NanoBoard NB2 , 3000-series NanoBoard , peripheral board(s) ), a range of SPI slave resources will be available to you. Most of ...

    admin - 11/06/2013 - 05:35

  6. Desktop NanoBoard NB2DSK01

    ... This documentation is now considered legacy - Altium no longer manufactures, nor sells, any of the NanoBoard, Peripheral ... hardware, detailed here. Altium's Desktop NanoBoard NB2DSK01 is a unique, reconfigurable hardware platform that harnesses the power ...

    admin - 01/29/2016 - 17:15

  7. Updating the Firmware on the Desktop NanoBoard NB2DSK01

    The Desktop NanoBoard NB2DSK01 uses a Xilinx Spartan-3 device (XC3S1500-4FG676C) as the controller for the board. Referred to as the NB2DSK01 - NanoTalk Controller , this device ...

    admin - 09/13/2017 - 15:32

  8. NanoBoard SPI Communications - Interface Wiring

    Related articles: NB2DSK01 SPI System Overview , NanoBoard 3000 SPI System Overview Accessing an SPI-compatible resource from within an FPGA design is most easily accomplished by ... ( NanoBoard NB2 , 3000-series NanoBoard , peripheral board(s) ), a range of SPI slave resources will be available to you. Most of ...

    admin - 09/13/2017 - 15:32

  9. NanoBoard SPI Communications - Accessing the Common SPI Bus from an FPGA Design

    ... Related articles: NanoBoard SPI Communications - Interface Wiring , Using SPI Flash Memory as Embedded Memory From ... SPI Device on the NanoBoard NB2 Related article: NB2DSK01 SPI System Overview For common-bus SPI devices that can be ...

    admin - 11/06/2013 - 05:35

  10. NB2DSK01 - NanoBoard-PC Interface (Parallel Port)

    The NB2DSK01 can be connected to your PC via the computer's standard parallel port. ... provides a corresponding parallel port through use of a 26-pin Male header. Figure 1. Parallel port interface for ... to the DATA line of the DS2406 device used to provide board identification for the NB2DSK01. This is a spare pin of the header and is ...

    admin - 11/06/2013 - 05:35

Pages

You are reporting an issue with the following selected text and/or image within the active document: