Search
Search results
-
NB2DSK01 - Configuration PROM
The NB2DSK01 uses a Xilinx Platform Flash Configuration PROM device (XCF08PFS48C) in which to store the system's ... hold the NanoBoard firmware. The XCF08PFS48C is a 48-pin device providing 8M of memory. On power-up, the firmware is ...
admin - 11/06/2013 - 05:35
-
NB2DSK01 - Configuration PROM
The NB2DSK01 uses a Xilinx Platform Flash Configuration PROM device (XCF08PFS48C) in which to store the system's ... hold the NanoBoard firmware. The XCF08PFS48C is a 48-pin device providing 8M of memory. On power-up, the firmware is ...
admin - 09/13/2017 - 15:32
-
Updating the Firmware on the Desktop NanoBoard NB2DSK01
The Desktop NanoBoard NB2DSK01 uses a Xilinx Spartan-3 device (XC3S1500-4FG676C) as the controller for the board. Referred to as ... firmware is stored in a Xilinx Platform Flash NB2DSK01 - Configuration PROM device (XCF08PFS48C), designated U7 on the board. On ...
admin - 11/06/2013 - 05:35
-
Updating the Firmware on the Desktop NanoBoard NB2DSK01
The Desktop NanoBoard NB2DSK01 uses a Xilinx Spartan-3 device (XC3S1500-4FG676C) as the controller for the board. Referred to as ... firmware is stored in a Xilinx Platform Flash NB2DSK01 - Configuration PROM device (XCF08PFS48C), designated U7 on the board. On ...
admin - 09/13/2017 - 15:32
-
Altium Hardware FAQs - NanoBoards
... Can I use the daughter boards I have for my NanoBoard-NB1 with the Desktop NanoBoard NB2DSK01? All of the daughter boards available from Altium can be readily ...
admin - 11/06/2013 - 05:35
-
NB2DSK01 Motherboard Resources
Altium's Desktop NanoBoard NB2DSK01 is a 300 x 165mm (11.8" x 6.5") eight layer printed circuit board (6 x ... which are made available to the target FPGA on the currently-fitted daughter board. There are also a number of system resources, that are ... Power NanoTalk Controller Configuration PROM System JTAG Programming Port ...
admin - 11/06/2013 - 05:35
-
NB2DSK01 Motherboard Resources
Altium's Desktop NanoBoard NB2DSK01 is a 300 x 165mm (11.8" x 6.5") eight layer printed circuit board (6 x ... which are made available to the target FPGA on the currently-fitted daughter board. There are also a number of system resources, that are ... Power NanoTalk Controller Configuration PROM System JTAG Programming Port ...
admin - 09/13/2017 - 15:32
-
Altium Hardware FAQs - NanoBoards
... Can I use the daughter boards I have for my NanoBoard-NB1 with the Desktop NanoBoard NB2DSK01? All of the daughter boards available from Altium can be readily ...
admin - 09/13/2017 - 15:32
-
NanoTalk
The NB2DSK01 includes Altium's proprietary communications protocol, referred to as ... as part of the firmware running in a Xilinx Spartan-3 1500 FPGA device (XC3S1500-4FG676C) on the motherboard. This device is ... is field-upgradeable, by using Altium Designer to install configuration data – the NanoBoard firmware – into a Xilinx serial Flash ...
admin - 11/06/2013 - 05:35
-
NanoTalk
The NB2DSK01 includes Altium's proprietary communications protocol, referred to as ... as part of the firmware running in a Xilinx Spartan-3 1500 FPGA device (XC3S1500-4FG676C) on the motherboard. This device is ... is field-upgradeable, by using Altium Designer to install configuration data – the NanoBoard firmware – into a Xilinx serial Flash ...
admin - 09/13/2017 - 15:32