Search
Search results
-
Power Monitoring on the Desktop NanoBoard NB2DSK01
... hardware configurations possible for a Desktop NanoBoard NB2DSK01 becomes considerable. Add to this, the ability to connect expansion ... Power Monitoring Functionality at the Hardware-Level Accessing and Using Power Monitoring Graphical ...
admin - 11/06/2013 - 05:35
-
NB2DSK01 - Power
The NB2DSK01 is powered by a 5V regulated supply, the power module for which is supplied in the box. If the total power consumption of a given NanoBoard configuration – i.e. daisy-chained and/or with connected expansion devices/user boards – exceeds 4A, ...
admin - 11/06/2013 - 05:35
-
NB2DSK01 - Power
The NB2DSK01 is powered by a 5V regulated supply, the power module for which is supplied in the box. If the total power consumption of a given NanoBoard configuration – i.e. daisy-chained and/or with connected expansion devices/user boards – exceeds 4A, ...
admin - 09/13/2017 - 15:32
-
Altium Hardware FAQs - NanoBoards
... Can I use the daughter boards I have for my NanoBoard-NB1 with the Desktop NanoBoard NB2DSK01? All of the daughter boards available from Altium can be readily ...
admin - 11/06/2013 - 05:35
-
Updating the Firmware on the Desktop NanoBoard NB2DSK01
The Desktop NanoBoard NB2DSK01 uses a Xilinx Spartan-3 device (XC3S1500-4FG676C) as the controller for the board. Referred to as ... device (XCF08PFS48C), designated U7 on the board. On power-up, the firmware is automatically loaded from the Configuration PROM into ...
admin - 11/06/2013 - 05:35
-
NB2DSK01 Motherboard Resources
Altium's Desktop NanoBoard NB2DSK01 is a 300 x 165mm (11.8" x 6.5") eight layer printed circuit board (6 x ... to GND. The other plane layer is used primarily for the 3.3V power supply, but incorporates a split region to accommodate the 5V supply. ... which are made available to the target FPGA on the currently-fitted daughter board. There are also a number of system resources, that are ...
admin - 11/06/2013 - 05:35
-
Updating the Firmware on the Desktop NanoBoard NB2DSK01
The Desktop NanoBoard NB2DSK01 uses a Xilinx Spartan-3 device (XC3S1500-4FG676C) as the controller for the board. Referred to as ... device (XCF08PFS48C), designated U7 on the board. On power-up, the firmware is automatically loaded from the Configuration PROM into ...
admin - 09/13/2017 - 15:32
-
Desktop NanoBoard NB2DSK01
... This documentation is now considered legacy - Altium no longer manufactures, nor sells, any of the NanoBoard, Peripheral ... hardware, detailed here. Altium's Desktop NanoBoard NB2DSK01 is a unique, reconfigurable hardware platform that harnesses the power ...
admin - 01/29/2016 - 17:15
-
NB2DSK01 Motherboard Resources
Altium's Desktop NanoBoard NB2DSK01 is a 300 x 165mm (11.8" x 6.5") eight layer printed circuit board (6 x ... to GND. The other plane layer is used primarily for the 3.3V power supply, but incorporates a split region to accommodate the 5V supply. ... which are made available to the target FPGA on the currently-fitted daughter board. There are also a number of system resources, that are ...
admin - 09/13/2017 - 15:32
-
NB2DSK01 - TFT LCD Panel (with Touch Screen)
The NB2DSK01 provides high quality color display through a Hitachi TX09D50VM1CAA ... the touch screen. The NB2DSK01 motherboard utilizes the power of this display module to provide an interactive GUI with which to perform various board set-up functions – in essence a direct (and interactive) link with the firmware ...
admin - 11/06/2013 - 05:35