Search
Search results
-
Live Drill Drawing
... in the package of data provided to the PCB fabricator is a drill drawing. The actual drill instructions are provided in a drill file, ... presents the data in a format suitable for loading into an NC drill machine. To provide that same information in a human-friendly, visual ...
admin - 09/13/2017 - 15:32
-
NC Drill Setup
... page: WorkspaceManager Dialogs The NC Drill Setup Dialog. Summary The NC Drill Setup dialog is used ...
admin - 09/13/2017 - 15:32
-
NC Drill Output Options
Summary The NC Drill Setup Dialog The NC Drill Setup dialog provides you with tools to completely configure your NC Drill file output options. The NC Drill Format region of the dialog allows ...
admin - 07/30/2014 - 16:16
-
Gerber Setup
... to allow unconnected pads in mid-layer on Gerber plots. Drill Drawing Tab The Gerber Setup - Drill Drawing ... Zeroes For example, consider the generation of NC Drill files with format 2:5 . Using this format can yield the following ...
admin - 08/23/2016 - 05:10
-
NC Drill Setup
... page: WorkspaceManager Dialogs The NC Drill Setup Dialog. Summary The NC Drill Setup dialog is used ...
admin - 07/31/2014 - 15:23
-
Gerber Setup
... to allow unconnected pads in mid-layer on Gerber plots. Drill Drawing Tab The Gerber Setup - Drill Drawing ... Zeroes For example, consider the generation of NC Drill files with format 2:5 . Using this format can yield the following ...
admin - 09/13/2017 - 15:32
-
Configuring Output Media (Output Job File)
... Folder names are: Pick Place Output, Gerber Output, NC Drill Output, Test Point Output, Netlists and Reports. If you have opted to ...
admin - 11/26/2013 - 05:28
-
Drill File Import
... None Summary This command is used to import a drill file into the current document. Details After launching the command, the File Import - NC Drill dialog will appear. Use the dialog to locate and open the required ...
admin - 11/06/2013 - 09:54
-
Drill File Import
... None Summary This command is used to import a drill file into the current document. Details After launching the command, the File Import - NC Drill dialog will appear. Use the dialog to locate and open the required ...
admin - 09/13/2017 - 15:32
-
Configuring Output Media (Output Job File)
... Folder names are: Pick Place Output, Gerber Output, NC Drill Output, Test Point Output, Netlists and Reports. If you have opted to ...
admin - 09/13/2017 - 15:32