Search
Search results
-
NanoBoard 3000 - User Prototyping Area
The NanoBoard 3000 provides a dedicated prototyping area, courtesy of an array of unconnected test points. 36 of these points (around ...
admin - 11/06/2013 - 05:35
-
NanoBoard 3000 - User Prototyping Area
The NanoBoard 3000 provides a dedicated prototyping area, courtesy of an array of unconnected test points. 36 of these points (around ...
admin - 09/13/2017 - 15:32
-
PB30 Prototyping Peripheral Board
... resources – accessible by the User FPGA device on a NanoBoard NB2 or 3000-series NanoBoard. The board offers pre-defined land areas to accommodate ...
admin - 02/10/2014 - 21:46
-
PB30 Prototyping Peripheral Board
... resources – accessible by the User FPGA device on a NanoBoard NB2 or 3000-series NanoBoard. The board offers pre-defined land areas to accommodate ...
admin - 09/13/2017 - 15:32
-
NanoBoard 3000 - User IO Headers
The NanoBoard 3000 includes two I/O headers that allow user-defined hardware to be interfaced to the User FPGA. These 20-pin headers – ...
admin - 11/06/2013 - 05:35
-
NanoBoard 3000 - User IO Headers
The NanoBoard 3000 includes two I/O headers that allow user-defined hardware to be interfaced to the User FPGA. These 20-pin headers – ...
admin - 09/13/2017 - 15:32
-
NanoBoard 3000 - Motherboard Resources
Related articles: Functional Overview of the NanoBoard 3000 , Key Features of the NanoBoard 3000 Each of Altium's ...
admin - 04/15/2014 - 20:52
-
NanoBoard 3000 - Motherboard Resources
Related articles: Functional Overview of the NanoBoard 3000 , Key Features of the NanoBoard 3000 Each of Altium's ...
admin - 09/13/2017 - 15:32
-
NanoBoard 3000 - Power
The NanoBoard 3000 is powered by a 5V regulated supply, the power module for which is ... required. Such a power source must provide a regulated 5V +/-5% center positive supply. The connector is a 5.5mm diameter 2.5mm pin type DC ...
admin - 11/06/2013 - 05:35
-
NanoBoard 3000 - Power
The NanoBoard 3000 is powered by a 5V regulated supply, the power module for which is ... required. Such a power source must provide a regulated 5V +/-5% center positive supply. The connector is a 5.5mm diameter 2.5mm pin type DC ...
admin - 09/13/2017 - 15:32