Search
Search results
-
Offset Holes in Pads
It is now possible to offset the pad land patterns from the hole. An example of a pad with offset hole ...
admin - 09/13/2017 - 15:32
-
Offset Holes in Pads
It is now possible to offset the pad land patterns from the hole. An example of a pad with offset hole ...
admin - 11/06/2013 - 09:29
-
Pad
... set larger than the pad to define (copper free) mechanical holes. Edit the value in this field to change the pad hole size. Values ... set independently to define asymmetric pad shapes. Offset From Hole Center(X/Y) - Enter a value to offset the pad landing area ...
admin - 11/06/2013 - 09:54
-
Enhanced PCB Modeling
... PCB Texture Mapping Via Stack Ups and Offset Holes The modeling of the PCB within Altium Designer is key to ...
admin - 11/06/2013 - 09:29
-
Enhanced PCB Modeling
... PCB Texture Mapping Via Stack Ups and Offset Holes The modeling of the PCB within Altium Designer is key to ...
admin - 09/13/2017 - 15:32
-
Pad
... set larger than the pad to define (copper free) mechanical holes. Edit the value in this field to change the pad hole size. Values ... set independently to define asymmetric pad shapes. Offset From Hole Center(X/Y) - Enter a value to offset the pad landing area ...
admin - 09/13/2017 - 15:32
-
PCB API Design Objects Interfaces
... Description This procedure moves the design object by an offset in horizontal and vertical directions specified by the AX and AY ... hole within a pad object. This applies to square and slotted holes. This property is supported by the GetState_HoleRotation and ...
admin - 02/15/2017 - 15:10
-
Whats New in Altium Designer 6.0
... L shortcut key. Figure 57. Define the X and Y offset amounts in the Move Selection dialog. Improved Polygon Pour ... Separate Drill Files for Plated and Non-plated Holes Separate ASCII format drill file are automatically generated for all ...
admin - 11/06/2013 - 09:29
-
Tutorial - Integrating MCAD Objects and PCB Designs
... height off the board surface ( Standoff Height ) offset. Note : The STEP model may not be oriented correctly in ... any flat surface on any 3D body can be used. Any circular holes in the surface are created as pads on the generated board shape and are ...
admin - 07/14/2014 - 07:17
-
String
... on the PCB. .Hole_Count – the number of drill holes on the PCB. .Layer_Name – the name of the layer the string is ... size, text justification within the rectangle, and an offset for the text in relation to the rectangle's edge. The Use ...
admin - 11/20/2013 - 09:30