Search
Search results
-
OpenBus Tutorial - Configuring Processors, Peripherals and Memory
In our OpenBus System, we have three components that fall under this category of ... Let's configure these components now. Double-click on the processor component to access the Configure (32-bit Processors) ... Figure 3. Configured SRAM Controller. Configuring the Interconnect Components ...
admin - 01/22/2014 - 19:20
-
OpenBus Tutorial - Configuring Processors, Peripherals and Memory
In our OpenBus System, we have three components that fall under this category of ... Let's configure these components now. Double-click on the processor component to access the Configure (32-bit Processors) ... Figure 3. Configured SRAM Controller. Configuring the Interconnect Components ...
admin - 09/13/2017 - 15:32
-
Tutorial - Getting Started with the Innovation Station
... true and sustainable product differentiation. In this tutorial, we will first define the Innovation Station, then implement a simple ... design hierarchy within an FPGA project Implementing an OpenBus-based FPGA design, including sourcing and placing components, ...
admin - 01/29/2016 - 17:09
-
Tutorial - Getting Started with the Innovation Station
... true and sustainable product differentiation. In this tutorial, we will first define the Innovation Station, then implement a simple ... design hierarchy within an FPGA project Implementing an OpenBus-based FPGA design, including sourcing and placing components, ...
admin - 09/13/2017 - 15:32
-
OpenBus Tutorial - Configuring the System
Now we have built the OpenBus System, it is time to configure it. The following is a list of areas ... System to be the same as that of the original schematic-based design. Although the correct settings are listed for your convenience, ... configuration of an OpenBus System actually is! Configuring Processors, Peripherals and Memory Configuring the ...
admin - 01/22/2014 - 19:19
-
OpenBus Tutorial - Configuring the System
Now we have built the OpenBus System, it is time to configure it. The following is a list of areas ... System to be the same as that of the original schematic-based design. Although the correct settings are listed for your convenience, ... configuration of an OpenBus System actually is! Configuring Processors, Peripherals and Memory Configuring the ...
admin - 09/13/2017 - 15:32
-
OpenBus Tutorial - Placing Components into the System
The starting point for any OpenBus System document is the placement of the required devices that will ... with the OpenBus panel access button, to the bottom-right of the main design window. The panel contains graphical ... we will use the same names as those specified when configuring the WB_INTERCON devices in the original design. In this way, we ...
admin - 01/22/2014 - 19:18
-
OpenBus Tutorial - Placing Components into the System
The starting point for any OpenBus System document is the placement of the required devices that will ... with the OpenBus panel access button, to the bottom-right of the main design window. The panel contains graphical ... we will use the same names as those specified when configuring the WB_INTERCON devices in the original design. In this way, we ...
admin - 09/13/2017 - 15:32
-
Whats New in Altium Designer 6.8
... from the OutputJob Editor. Any number of Schematic, OpenBus, PCB and PCB3D outputs including all printable Assembly Drawings, ... get started with OpenBus System, take a closer look at a new tutorial Converting an existing FPGA Design to the OpenBus System ...
admin - 11/06/2013 - 09:29
-
Whats New in Altium Designer 6.8
... from the OutputJob Editor. Any number of Schematic, OpenBus, PCB and PCB3D outputs including all printable Assembly Drawings, ... get started with OpenBus System, take a closer look at a new tutorial Converting an existing FPGA Design to the OpenBus System ...
admin - 09/13/2017 - 15:32