Search

Search results

  1. Operating the Logic Analyzer

    The host computer is connected to the target Logic Analyzer instrument using the IEEE 1149.1 (JTAG) standard interface. This ... Width specified for the Analyzer, you have the choice of operating in one of two trigger modes: Single n-bit Channel (default, ...

    admin - 11/06/2013 - 09:09

  2. Operating the Logic Analyzer

    The host computer is connected to the target Logic Analyzer instrument using the IEEE 1149.1 (JTAG) standard interface. This ... Width specified for the Analyzer, you have the choice of operating in one of two trigger modes: Single n-bit Channel (default, ...

    admin - 09/13/2017 - 15:32

  3. Logic Analyzer

    ... Related Training Videos How do I setup and use the LAX instrument? An example of the configurable Logic ... the LAX will open the LAX Instrument. Main article: Operating the Logic Analyzer From the LAX instrument, you have access to ...

    admin - 11/06/2013 - 09:09

  4. Logic Analyzer

    ... Related Training Videos How do I setup and use the LAX instrument? An example of the configurable Logic ... the LAX will open the LAX Instrument. Main article: Operating the Logic Analyzer From the LAX instrument, you have access to ...

    admin - 09/13/2017 - 15:32

  5. Placing the Logic Analyzer

    The configurable LAX instrument provides an efficient means of analyzing the ... system clock. CLK_CAP must be slower than CLK, otherwise the Logic Analyzer will not capture data at all. To capture data at the same rate ... Configuring the Logic Analyzer Operating the Logic Analyzer Viewing Data Captured by the Logic ...

    admin - 11/06/2013 - 09:09

  6. Placing the Logic Analyzer

    The configurable LAX instrument provides an efficient means of analyzing the ... system clock. CLK_CAP must be slower than CLK, otherwise the Logic Analyzer will not capture data at all. To capture data at the same rate ... Configuring the Logic Analyzer Operating the Logic Analyzer Viewing Data Captured by the Logic ...

    admin - 09/13/2017 - 15:32

  7. Configuring the Logic Analyzer

    The LAX instrument can be configured after placement on the schematic sheet. ... the pop-up menu that appears (e.g. Configure U2 (LAX) for a logic analyzer with designator U2). Alternatively, click on the Configure ... Logic Analyzer LAX - Pin Description Operating the Logic Analyzer Viewing Data Captured by the Logic ...

    admin - 11/06/2013 - 09:09

  8. Viewing Data Captured by the Logic Analyzer

    Once captured, you can view the sampled data either in tabular format, or as a set of digital and/or analog ... is determined by the Delay For option, in the Logic Analyzer Triggering region of the LAX panel. For example, if this ... Configuring the Logic Analyzer Operating the Logic Analyzer LAX Working with Panels ...

    admin - 09/13/2017 - 15:32

  9. Configuring the Logic Analyzer

    The LAX instrument can be configured after placement on the schematic sheet. ... the pop-up menu that appears (e.g. Configure U2 (LAX) for a logic analyzer with designator U2). Alternatively, click on the Configure ... Logic Analyzer LAX - Pin Description Operating the Logic Analyzer Viewing Data Captured by the Logic ...

    admin - 09/13/2017 - 15:32

  10. LAX - Pin Description

    The default look of the LAX as it is placed from the library, it must be ...       Logic Analyzer Input Signals CLK I Rise ... Configuring the Logic Analyzer Operating the Logic Analyzer Viewing Data Captured by the Logic ...

    admin - 09/13/2017 - 15:32

Pages

You are reporting an issue with the following selected text and/or image within the active document: