Search
Search results
-
Peripheral Board Common Services
In addition to IO pins, each peripheral board connector on the NB2DSK01 motherboard provides pins for the following ... Signal The NanoTalk Controller uses dedicated ID lines, based on the 1-Wire® serial bus protocol, to verify which peripheral ...
admin - 09/13/2017 - 15:32
-
Peripheral Board Common Services
In addition to IO pins, each peripheral board connector on the NB2DSK01 motherboard provides pins for the following ... Signal The NanoTalk Controller uses dedicated ID lines, based on the 1-Wire® serial bus protocol, to verify which peripheral ...
admin - 11/06/2013 - 05:35
-
PB30 Prototyping Peripheral Board
... Additional Resources Datasheet Board Schematics Parent article: Peripheral Boards Altium's Prototyping peripheral board (PB30) provides ...
admin - 02/10/2014 - 21:46
-
PB30 Prototyping Peripheral Board
... Additional Resources Datasheet Board Schematics Parent article: Peripheral Boards Altium's Prototyping peripheral board (PB30) provides ...
admin - 09/13/2017 - 15:32
-
Peripheral Board ID Memory
Board identification is handled courtesy of a DS2406 device (from Dallas ... primarily used to contain a code with which to identify the peripheral board when plugged in. The NanoTalk Controller interrogates this ... Location on Board The DS2406 device (designated U1_ID ) is located on the solder side of the board, to the bottom-left of the ...
admin - 02/06/2014 - 23:19
-
Peripheral Board ID Memory
Board identification is handled courtesy of a DS2406 device (from Dallas ... primarily used to contain a code with which to identify the peripheral board when plugged in. The NanoTalk Controller interrogates this ... Location on Board The DS2406 device (designated U1_ID ) is located on the solder side of the board, to the bottom-left of the ...
admin - 09/13/2017 - 15:32
-
PB02 Mass Storage Peripheral Board
Altium's Mass Storage peripheral board PB02 provides a host of Memory Card/ATA Interface resources, available ... 3.5" 1-Wire® memory device used to store board ID and related information 1-Wire® device socket (3-pin, 1.27mm ...
admin - 11/06/2013 - 05:35
-
PB03 USB - IrDA - Ethernet Peripheral Board
Altium's USB - IrDA - Ethernet peripheral board PB03 provides a host of communications resources, available for use by ...
admin - 11/06/2013 - 05:35
-
PB01 Audio-Video Peripheral Board
Altium's Audio / Video peripheral board PB01 provides a Stereo Audio CODEC and a host of video capabilities, ... 1-Wire® memory device used to store board ID and related information 1-Wire® device socket (3-pin, 1.27mm ...
admin - 02/06/2014 - 23:19
-
Daughter Board ID Memory
Board identification is handled courtesy of a DS2406 device (from Dallas ... to ensure continuous power. Similar devices on all peripheral boards and 3-connector daughter boards allow the NanoTalk Controller ... Location on Board The DS2406 device (designated U1_ID ) is located on the solder side of the board. Schematic Reference ...
admin - 11/06/2013 - 05:35