Search
Search results
-
OpenBus Interconnect Component
... 32-bit processors supported by, and available for use in, an OpenBus System. So just what makes the use of this intermediary ... about the Interconnect component in greater detail: Placing an Interconnect Component Editing an Interconnect Component ...
admin - 11/06/2013 - 09:09
-
OpenBus Interconnect Component
... 32-bit processors supported by, and available for use in, an OpenBus System. So just what makes the use of this intermediary ... about the Interconnect component in greater detail: Placing an Interconnect Component Editing an Interconnect Component ...
admin - 09/13/2017 - 15:32
-
Placing an Interconnect Component
As with all OpenBus components, the Interconnect component resides on, and is placed from, the OpenBus Palette ... or Y-axis respectively. Figure 1. Place an Interconnect component directly from the OpenBus Palette panel. ...
admin - 11/06/2013 - 09:09
-
Placing an Interconnect Component
As with all OpenBus components, the Interconnect component resides on, and is placed from, the OpenBus Palette ... or Y-axis respectively. Figure 1. Place an Interconnect component directly from the OpenBus Palette panel. ...
admin - 09/13/2017 - 15:32
-
OpenBus Tutorial - Placing Components into the System
... the required entry in the OpenBus Palette panel and then placing at the desired location in the workspace. Familiar schematic placement ... to effect placement. Figure 2. Adding a port to an Interconnect component. Note: Ports can be added in clustered ...
admin - 01/22/2014 - 19:18
-
OpenBus Tutorial - Placing Components into the System
... the required entry in the OpenBus Palette panel and then placing at the desired location in the workspace. Familiar schematic placement ... to effect placement. Figure 2. Adding a port to an Interconnect component. Note: Ports can be added in clustered ...
admin - 09/13/2017 - 15:32
-
Tutorial - Getting Started with the Innovation Station
... FPGA design the Altium way , introducing you to: An overview of the Desktop NanoBoard FPGA project creation within Altium ... an OpenBus-based FPGA design, including sourcing and placing components, connecting them together, and interfacing them to ...
admin - 01/29/2016 - 17:09
-
Tutorial - Getting Started with the Innovation Station
... FPGA design the Altium way , introducing you to: An overview of the Desktop NanoBoard FPGA project creation within Altium ... an OpenBus-based FPGA design, including sourcing and placing components, connecting them together, and interfacing them to ...
admin - 09/13/2017 - 15:32
-
WB_DUALMASTER - Interfacing
Figure 1 shows an example of using a configurable Wishbone Dual Master component to connect ... located on a daughter board. On the Master side, Wishbone Interconnect components have been used to connect each processor to the Dual ... to more than one slave memory or peripheral device. By placing a Wishbone Interconnect component after the Wishbone Dual Master ...
admin - 11/06/2013 - 09:09
-
WB_DUALMASTER - Interfacing
Figure 1 shows an example of using a configurable Wishbone Dual Master component to connect ... located on a daughter board. On the Master side, Wishbone Interconnect components have been used to connect each processor to the Dual ... to more than one slave memory or peripheral device. By placing a Wishbone Interconnect component after the Wishbone Dual Master ...
admin - 09/13/2017 - 15:32