Search
Search results
-
Logic Analyzer
... Related Training Videos How do I setup and use the LAX instrument? An example of the configurable Logic ... the signal sets and other options. Main articles: Placing the Logic Analyzer , Configuring the Logic Analyzer When the ...
admin - 11/06/2013 - 09:09
-
Operating the Logic Analyzer
The host computer is connected to the target Logic Analyzer instrument using the IEEE 1149.1 (JTAG) standard interface. This ... is filled. See Also Logic Analyzer Placing the Logic Analyzer LAX - Pin Description ...
admin - 11/06/2013 - 09:09
-
Operating the Logic Analyzer
The host computer is connected to the target Logic Analyzer instrument using the IEEE 1149.1 (JTAG) standard interface. This ... is filled. See Also Logic Analyzer Placing the Logic Analyzer LAX - Pin Description ...
admin - 09/13/2017 - 15:32
-
Placing the Logic Analyzer
The configurable LAX instrument provides an efficient means of analyzing the ... system clock. CLK_CAP must be slower than CLK, otherwise the Logic Analyzer will not capture data at all. To capture data at the same rate ... soft devices JTAG chain within the design. This is done by placing a JTAG Port (NEXUS_JTAG_CONNECTOR) and corresponding Soft Nexus-Chain ...
admin - 11/06/2013 - 09:09
-
Placing the Logic Analyzer
The configurable LAX instrument provides an efficient means of analyzing the ... system clock. CLK_CAP must be slower than CLK, otherwise the Logic Analyzer will not capture data at all. To capture data at the same rate ... soft devices JTAG chain within the design. This is done by placing a JTAG Port (NEXUS_JTAG_CONNECTOR) and corresponding Soft Nexus-Chain ...
admin - 09/13/2017 - 15:32
-
Logic Analyzer
... Related Training Videos How do I setup and use the LAX instrument? An example of the configurable Logic ... the signal sets and other options. Main articles: Placing the Logic Analyzer , Configuring the Logic Analyzer When the ...
admin - 09/13/2017 - 15:32
-
Configuring the Logic Analyzer
The LAX instrument can be configured after placement on the schematic sheet. ... the pop-up menu that appears (e.g. Configure U2 (LAX) for a logic analyzer with designator U2). Alternatively, click on the Configure ... the design. See Also Logic Analyzer Placing the Logic Analyzer LAX - Pin Description ...
admin - 11/06/2013 - 09:09
-
Viewing Data Captured by the Logic Analyzer
Once captured, you can view the sampled data either in tabular format, or as a set of digital and/or analog ... is determined by the Delay For option, in the Logic Analyzer Triggering region of the LAX panel. For example, if this ... sample. See Also Logic Analyzer Placing the Logic Analyzer LAX - Pin Description ...
admin - 09/13/2017 - 15:32
-
Configuring the Logic Analyzer
The LAX instrument can be configured after placement on the schematic sheet. ... the pop-up menu that appears (e.g. Configure U2 (LAX) for a logic analyzer with designator U2). Alternatively, click on the Configure ... the design. See Also Logic Analyzer Placing the Logic Analyzer LAX - Pin Description ...
admin - 09/13/2017 - 15:32
-
LAX - Pin Description
The default look of the LAX as it is placed from the library, it must be ... Logic Analyzer Input Signals CLK I Rise ... See Also Logic Analyzer Placing the Logic Analyzer Configuring the Logic Analyzer ...
admin - 09/13/2017 - 15:32