Search
Search results
-
Internal Power and Split Planes
... using internal power and split planes. Plane Basics The PCB Editor supports up to 16 internal power planes. You can assign a net to each of these layers or share a power plane between a number of nets by splitting it into two or more isolated areas. ... to power planes are controlled by the Plane design rules. Power planes are created in the negative. Objects placed on the power ...
admin - 04/30/2014 - 12:52
-
Internal Power and Split Planes
... using internal power and split planes. Plane Basics The PCB Editor supports up to 16 internal power planes. You can assign a net to each of these layers or share a power plane between a number of nets by splitting it into two or more isolated areas. ... to power planes are controlled by the Plane design rules. Power planes are created in the negative. Objects placed on the power ...
admin - 09/13/2017 - 15:32
-
PCB
... or Layer Stack Regions, or set to use the From-To, Split-Plane, Differential Pairs, and Hole Size Editors. Select the ... defined xSignal can then be used to scope relevant design rules such as Length and Matched Length, which will then be obeyed during ...
admin - 01/06/2015 - 09:29
-
Design Rule Checker
... This dialog displays the Report Options and Rules to Check folders. Click the Report Options folder to display ... have been found, the default value is 500. Split Plane DRC Report Options Report Broken Planes - Enable to have ...
admin - 11/06/2013 - 09:54
-
Plane Rules
Parent page: Design Rules Reference Power Plane Connect Style Power Plane Clearance Polygon Connect Style ...
admin - 09/13/2017 - 15:32
-
Default Rules Created with a New PCB Document
See Also Design Rules Reference The following design rules are created by default ... Solder Mask Expansion Paste Mask Expansion Plane Power Plane Connect Style Power Plane Clearance Polygon Connect Style ...
admin - 09/13/2017 - 15:32
-
Default Rules Created with a New PCB Document
See Also Design Rules Reference The following design rules are created by default ... Solder Mask Expansion Paste Mask Expansion Plane Power Plane Connect Style Power Plane Clearance Polygon Connect Style ...
admin - 06/04/2015 - 03:19
-
Power Plane Connect Style
Rule category: Plane Rule classification: Unary Summary This rule ... the style of the connection from a component pin to a power plane. Constraints Default constraints for the Power Plane ... How Duplicate Rule Contentions are Resolved All rules are resolved by the priority setting. The system goes through the rules ...
admin - 02/27/2014 - 06:27
-
Power Plane Connect Style
Rule category: Plane Rule classification: Unary Summary This rule ... the style of the connection from a component pin to a power plane. Constraints Default constraints for the Power Plane ... How Duplicate Rule Contentions are Resolved All rules are resolved by the priority setting. The system goes through the rules ...
admin - 09/13/2017 - 15:32
-
Design Rules Reference
Rules are defined and configured in the PCB Rules and Constraints Editor ... of the design – including routing widths, clearances, plane connection styles, routing via styles, and so on. Rules can be monitored ... Rules SMT Rules Mask Rules Plane Rules Testpoint Rules Manufacturing Rules High ...
admin - 09/13/2017 - 15:32