Search
Search results
-
Internal Power and Split Planes
Power planes are special solid copper internal layers, typically used to ... using internal power and split planes. Plane Basics The PCB Editor supports up to 16 internal power planes. You ... connecting to the power plane. The Power Plane Connect Style design rule specifies the style of the connection from a ...
admin - 04/30/2014 - 12:52
-
Internal Power and Split Planes
Power planes are special solid copper internal layers, typically used to ... using internal power and split planes. Plane Basics The PCB Editor supports up to 16 internal power planes. You ... connecting to the power plane. The Power Plane Connect Style design rule specifies the style of the connection from a ...
admin - 09/13/2017 - 15:32
-
Power Plane Connect Style
Rule category: Plane Rule classification: Unary Summary This rule ... the style of the connection from a component pin to a power plane. Constraints Default constraints for the Power Plane Connect Style rule. Connect Style – defines the style of the ...
admin - 02/27/2014 - 06:27
-
Power Plane Connect Style
Rule category: Plane Rule classification: Unary Summary This rule ... the style of the connection from a component pin to a power plane. Constraints Default constraints for the Power Plane Connect Style rule. Connect Style – defines the style of the ...
admin - 09/13/2017 - 15:32
-
Plane Rules
... Parent page: Design Rules Reference Power Plane Connect Style Power Plane Clearance Polygon Connect ...
admin - 09/13/2017 - 15:32
-
PCB API Design Objects Interfaces
... uses the board outline shape to determine the extents of the power planes for plane edge pull back, used when splitting power planes and for calculating the ...
admin - 02/15/2017 - 15:10
-
Plane Rules
... Parent page: Design Rules Reference Power Plane Connect Style Power Plane Clearance Polygon Connect ...
admin - 03/12/2015 - 03:12
-
PCB Processes
... True, False Change from legacy mode to DXP plane mode when importing from legacy designs and updating them. Tab ... Only can display internal planes 1 to 16. Otherwise the Power Pins information dialog appears. Example Process: ...
admin - 11/06/2013 - 09:09
-
Polygon Pours and Copper Regions
... design; a large, solid region of copper for carrying heavy power supply currents; or a solid ground area for EMC shielding. In Altium ... that it is attached to, is controlled by the applicable Plane - Polygon Connect Style design rule (Design » Rules ). ...
admin - 11/18/2013 - 07:24
-
Pad
... to. Pads automatically connect to any internal power planes that are assigned to the same net. The pad will connect in accordance with the applicable Power Plane Connect Style design rule. If you do not want pads to connect to power ...
admin - 08/19/2015 - 11:29