Search
Search results
-
Routing Corners
Rule category: Routing Rule classification: Unary Summary This rule ... Constraints Default constraints for the Routing Corners rule. Style – specifies which routing corner style to ...
admin - 02/27/2014 - 06:24
-
Routing Corners
Rule category: Routing Rule classification: Unary Summary This rule ... Constraints Default constraints for the Routing Corners rule. Style – specifies which routing corner style to ...
admin - 09/13/2017 - 15:32
-
Chamfered Routing
The chamfering of 90 degree routing corners is a technique used to reduce reflections caused by the corner in a ... replaced with region objects. Chamfering Routing Corners To chamfer the corners in a route: Select the ...
admin - 09/13/2017 - 15:32
-
Chamfered Routing
The chamfering of 90 degree routing corners is a technique used to reduce reflections caused by the corner in a ... replaced with region objects. Chamfering Routing Corners To chamfer the corners in a route: Select the ...
phil.loughhead@... - 11/29/2016 - 17:22
-
Routing ルール
Language Routing Rules Width Routing Via Style Routing Topology Routing Priority Routing Layers Routing Corners Fanout Control Differential Pair Routing ...
admin - 08/23/2019 - 14:29
-
Situs Routing Strategies
... page: PCB Dialogs The Situs Routing Strategies Dialog. Summary The Situs Routing Strategy ... routing pass that is used to provide mitering of routed corners. This pass is used when the Orthogonal option is enabled for the ...
admin - 11/06/2013 - 09:54
-
Situs Strategy Editor
... add and edit Auto Route strategy. Access In Situs Routing Strategies dialog ( AutoRoute >> Setup ), click Add ... routing pass that is used to provide mitering of routed corners. This pass is used when the Orthogonal option is enabled for the ...
admin - 11/06/2013 - 09:54
-
Pad
... the interconnection points from the component pins to the routing on the board. Pads can be used individually as free pads in a design, ... shaped pad (depending on the X-Size and Y-Size ), the corners are 90 degrees. Rounded Rectangle - a square or rectangular ...
admin - 08/19/2015 - 11:29
-
Situs Autorouting Essentials
... about board setup, design rules and a summary of the routing passes and routing strategies. The Situs Topological Router brings ... all Electrical and Routing design rules, except the Routing Corners rule. Rules are defined in the PCB Rules and Constraints Editor ...
admin - 08/15/2016 - 13:45
-
Interactively Routing a Net
Interactive Routing is more than placing down track objects to join the dots (pads). Altium Designer supports fully featured interactive routing, available via the Place » Interactive Routing command, ... router should apply to the task of reducing the number of corners in the proposed set of track segments that are currently attached to ...
admin - 11/18/2013 - 07:42