Search
Search results
-
Routing Topology
Rule category: Routing Rule classification: Unary Summary This rule specifies the topology to be employed when routing nets on the board. The topology of a net is the arrangement or pattern ...
admin - 09/13/2017 - 15:32
-
Routing Topology
Rule category: Routing Rule classification: Unary Summary This rule specifies the topology to be employed when routing nets on the board. The topology of a net is the arrangement or pattern ...
admin - 02/27/2014 - 06:24
-
PCB
... for the design, and their individual details such as signal/routing lengths and number of nodes. Note that multiple xSignals can be ... more information on From-Tos. Choosing a Predefined Topology The topology of a net is the arrangement or pattern of the ...
admin - 01/06/2015 - 09:29
-
High Speed Design with xSignals
... integrity can be managed through controlled impedance routing , which is achieved though careful design of both the PCB stackup and ... could then be routed using a Balanced T or a Fly-By routing topology, as shown in the image below. Four DDR2 RAM chips ...
phil.loughhead@... - 11/29/2016 - 17:22
-
High Speed Design with xSignals
... integrity can be managed through controlled impedance routing , which is achieved though careful design of both the PCB stackup and ... could then be routed using a Balanced T or a Fly-By routing topology, as shown in the image below. Four DDR2 RAM chips ...
admin - 09/13/2017 - 15:32
-
Connection
... connection lines are subsequently used when interactively routing (or Autorouting) in order to achieve the physical, routed links between ... the shortest overall connection length in each case - a net topology referred to as Shortest. The topology of part or all of a net can ...
admin - 11/19/2013 - 08:05
-
Routing ルール
Language Routing Rules Width Routing Via Style Routing Topology Routing Priority Routing Layers ...
admin - 08/23/2019 - 14:29
-
PCB
... for the design, and their individual details such as signal/routing lengths and number of nodes. Note that multiple xSignals can be ... more information on From-Tos. Choosing a Predefined Topology The topology of a net is the arrangement or pattern of the ...
admin - 09/13/2017 - 15:32
-
Technology Aware xSignals Wizard
... Length Groups, Diff Pair Matched Lengths rules and Fly-By topology for on-board DDR3/4. The Wizard assumes that a fly-by routing topology will be used. The page includes settings for the width of ...
admin - 09/13/2017 - 15:32
-
Connection
... connection lines are subsequently used when interactively routing (or Autorouting) in order to achieve the physical, routed links between ... the shortest overall connection length in each case - a net topology referred to as Shortest. The topology of part or all of a net can ...
admin - 09/13/2017 - 15:32