Search
Search results
-
Internal Power and Split Planes
... are special solid copper internal layers, typically used to provide an electrically stable ground or power reference throughout the ... Special support is also provided for connecting SMD power pins to power plane layers. SMD pads on a net that is connected to a ...
admin - 04/30/2014 - 12:52
-
Internal Power and Split Planes
... are special solid copper internal layers, typically used to provide an electrically stable ground or power reference throughout the ... Special support is also provided for connecting SMD power pins to power plane layers. SMD pads on a net that is connected to a ...
admin - 09/13/2017 - 15:32
-
SMD To Plane
... routing length from the center of the surface mount pad to the center of the pad/via connecting to a power plane. Constraints Default constraints for the SMD To Plane rule. Distance – the value for the maximum ...
admin - 08/05/2015 - 19:39
-
SMD To Plane
... routing length from the center of the surface mount pad to the center of the pad/via connecting to a power plane. Constraints Default constraints for the SMD To Plane rule. Distance – the value for the maximum ...
admin - 09/13/2017 - 15:32
-
Situs Autorouting Essentials
... The Situs Topological Router brings a new approach to the autorouting challenge. It uses advanced topological mapping to first ... or those that you want to have the cleanest routing. SMD Fanout Control The query system includes keywords that specifically ...
admin - 08/15/2016 - 13:45
-
IsRule
... Maximum Via Count Rule, Minimum Annular Ring Rule, Nets To Ignore Rule, Overshoot Falling Edge Rule, Overshoot Rising Edge Rule, ... Value Rule, Signal Stimulus Rule, Signal Top Value Rule, SMD Neck Down Rule, SMD To Corner Rule, SMD To Plane Rule, Solder Mask ...
admin - 09/13/2017 - 15:32
-
IsRule
... Maximum Via Count Rule, Minimum Annular Ring Rule, Nets To Ignore Rule, Overshoot Falling Edge Rule, Overshoot Rising Edge Rule, ... Value Rule, Signal Stimulus Rule, Signal Top Value Rule, SMD Neck Down Rule, SMD To Corner Rule, SMD To Plane Rule, Solder Mask ...
admin - 05/14/2018 - 14:07
-
SMT Rules
... Parent page: Design Rules Reference SMD To Corner SMD To Plane SMD Neck-Down SMD Entry ...
admin - 09/13/2017 - 15:32
-
How Design Rules are Applied
... as the violation occurs during placement. You may prefer to design first and check for violations later. If this is the case, you could ... ✔ Interactive routing SMD To Corner SMT ✔ ✔ ...
admin - 09/13/2017 - 15:32
-
SMT Rules
... Parent page: Design Rules Reference SMD To Corner SMD To Plane SMD Neck-Down SMD Entry ...
admin - 08/05/2015 - 19:48