Search
Search results
-
Signal Stimulus
Rule category : Signal Integrity Rule classification : Unary Summary Specifies the characteristics of the stimulus signal used when performing a signal integrity analysis on the design. This is ...
admin - 02/27/2014 - 12:01
-
Signal Stimulus
Rule category : Signal Integrity Rule classification : Unary Summary Specifies the characteristics of the stimulus signal used when performing a signal integrity analysis on the design. This is ...
admin - 09/13/2017 - 15:32
-
Performing Signal Integrity Analyses
This tutorial looks at performing Signal Integrity (SI) analyses. It covers setting up design parameters like ... also reads the PCB design rules from the schematic for the stimulus and supply nets. These rules can be added as PCB Layout directives or ...
admin - 11/16/2015 - 04:41
-
Performing Signal Integrity Analyses
This tutorial looks at performing Signal Integrity (SI) analyses. It covers setting up design parameters like ... also reads the PCB design rules from the schematic for the stimulus and supply nets. These rules can be added as PCB Layout directives or ...
admin - 09/13/2017 - 15:32
-
VHDL Synthesis Reference
... between statements by signals ; an assignment to a signal ( <= ) implies a driver. A signal can be thought of as a physical ... as high level performance models, environment models for stimulus/response, or system models including software, hardware, and ...
admin - 11/06/2013 - 09:09
-
Signal Integrity Rules
... Parent page: Design Rules Reference Signal Stimulus Overshoot - Falling Edge Overshoot - Rising Edge ...
admin - 03/12/2015 - 03:13
-
Run SI
... Summary This command is used to perform a signal integrity analysis of the current design. Details After ... create further problems at a later stage when using the Signal Integrity Analyzer. A common source of generated warnings lies in the ... the type Integrated Circuit will be assumed. A Signal Stimulus design rule must be set up. By default, no rule exists and the ...
admin - 11/06/2013 - 09:54
-
Signal Integrity Rules
... Parent page: Design Rules Reference Signal Stimulus Overshoot - Falling Edge Overshoot - Rising Edge ...
admin - 09/13/2017 - 15:32
-
Putting Signal Integrity in its Place
... speeds have undermined this basic assumption. Fast signal edge rates in modern digital designs and the introduction of ... the trace, the characteristic impedance of the trace at the stimulus frequency, and the termination characteristics at each end of the ...
admin - 09/13/2017 - 15:32
-
Putting Signal Integrity in its Place
... speeds have undermined this basic assumption. Fast signal edge rates in modern digital designs and the introduction of ... the trace, the characteristic impedance of the trace at the stimulus frequency, and the termination characteristics at each end of the ...
admin - 11/12/2013 - 05:07