Search
Search results
-
Testpoint System
Related Videos Testpoints/Testpoint Manager Testing is an important part of the ... to automatically assign testpoints based on defined design rules and using the Testpoint Manager . This automated assignment simply ...
admin - 12/16/2015 - 16:35
-
Testpoint System
Related Videos Testpoints/Testpoint Manager Testing is an important part of the ... to automatically assign testpoints based on defined design rules and using the Testpoint Manager . This automated assignment simply ...
admin - 09/13/2017 - 15:32
-
Testpoint Rules
Parent page: PCB Design Rules Reference Fabrication and Assembly Testpoint Style Fabrication and Assembly Testpoint Usage ...
admin - 03/12/2015 - 03:08
-
Fabrication and Assembly Testpoint Style
Rule category: Testpoint Rule classification: Unary Summary The Fabrication Testpoint Style and Assembly Testpoint Style design rules specify the allowable physical parameters of pads and vias that are to ...
admin - 09/13/2017 - 15:32
-
Fabrication and Assembly Testpoint Style
Rule category: Testpoint Rule classification: Unary Summary The Fabrication Testpoint Style and Assembly Testpoint Style design rules specify the allowable physical parameters of pads and vias that are to ...
admin - 02/27/2014 - 06:37
-
Fabrication and Assembly Testpoint Usage
Rule category: Testpoint Rule classification: Unary Summary The Fabrication Testpoint Usage and Assembly Testpoint Usage design rules specify which nets require testpoints for bare-board fabrication ...
admin - 09/13/2017 - 15:32
-
Testpoint Clearance Check
... The ability to configure any pad or via to function as a testpoint is a valuable feature used during bare-board fabrication testing, and ... part of the Altium Designer 15.1 update, the Testpoint Style rules have been enhanced to support the specification of the minimum allowed ...
phil.loughhead@... - 11/29/2016 - 17:22
-
Fabrication and Assembly Testpoint Usage
Rule category: Testpoint Rule classification: Unary Summary The Fabrication Testpoint Usage and Assembly Testpoint Usage design rules specify which nets require testpoints for bare-board fabrication ...
admin - 11/06/2013 - 09:54
-
Testpoint Rules
Parent page: PCB Design Rules Reference Fabrication and Assembly Testpoint Style Fabrication and Assembly Testpoint Usage ...
admin - 09/13/2017 - 15:32
-
Pad
... as curved connection lines in the PCB Editor. The Design Rules Checker will not report jumper connections as unrouted nets. ... by setting matching JumperID values in both pads. Testpoint Settings Each pad (or via) can be used as a testpoint site, on ...
admin - 08/19/2015 - 11:29