Search
Search results
-
The FPGA Workspace Map
At this stage, both FPGA and PCB projects have been created and linked. All ports on the FPGA project are linked, by net name, to the PCB project pins and there are ... can be readily checked, simply by launching the FPGA Workspace Map dialog. Access to this dialog is provided by choosing the ...
admin - 01/23/2014 - 13:33
-
The FPGA Workspace Map
At this stage, both FPGA and PCB projects have been created and linked. All ports on the FPGA project are linked, by net name, to the PCB project pins and there are ... can be readily checked, simply by launching the FPGA Workspace Map dialog. Access to this dialog is provided by choosing the ...
admin - 09/13/2017 - 15:32
-
FPGA Workspace Map
The following content has been imported from Legacy Help systems and is in the ... None Summary This command is used to run the FPGA Workspace Map dialog, from where you can check the status of linking between ...
admin - 11/06/2013 - 09:54
-
FPGA Workspace Map
The following content has been imported from Legacy Help systems and is in the ... None Summary This command is used to run the FPGA Workspace Map dialog, from where you can check the status of linking between ...
admin - 09/13/2017 - 15:32
-
FPGA Workspace Map
... Parent page: WorkspaceManager Dialogs The FPGA Workspace Map Dialog. Summary This dialog allows the designer to ...
admin - 11/06/2013 - 09:54
-
FPGA Workspace Map
... Parent page: WorkspaceManager Dialogs The FPGA Workspace Map Dialog. Summary This dialog allows the designer to ...
admin - 09/13/2017 - 15:32
-
Linking an FPGA Project to a PCB Project
... Related Training Videos How do I link and sync my FPGA and PCB projects? Quite often an FPGA-based design, and the design of the board upon which the physical FPGA device will be placed, are ...
admin - 08/23/2019 - 14:29
-
Linked FPGA-PCB Project Changes - Pin Swapping in the FPGA Project
Pin swaps initiated from the FPGA project are likely to be required when a design no longer fits within the ... to the PCB project. This is performed from within the FPGA Workspace Map dialog. Entering the FPGA Workspace Map dialog will show ...
admin - 01/23/2014 - 14:24
-
Linked FPGA-PCB Project Changes - Adding a Port to the FPGA Project
... when it is decided an additional port is required for an FPGA design. The process begins by adding the port to the top-level source schematic sheet ...
admin - 01/23/2014 - 14:25
-
Synchronize PCB and FPGA Project
... Parent page: WorkspaceManager Dialogs The Synchronize PCB and FPGA Project Dialog. Summary This dialog allows designer to synchronize ...
admin - 11/06/2013 - 09:54