Search
Search results
-
NanoBoard 3000 - Testing the PC to NanoBoard Connection
... After connecting your 3000-series NanoBoard to your PC and installing Altium Designer , you should check that the system software can also connect to the NanoBoard. This check is made using ...
admin - 03/05/2014 - 12:49
-
NanoBoard 3000 - Testing the PC to NanoBoard Connection
... After connecting your 3000-series NanoBoard to your PC and installing Altium Designer , you should check that the system software can also connect to the NanoBoard. This check is made using ...
admin - 09/13/2017 - 15:32
-
Testing the PC to NanoBoard Connection
Once you have connected the NB2DSK01 to your PC, you should check that the system software can also connect to the ...
admin - 11/06/2013 - 05:35
-
Troubleshooting NanoBoard Connection Problems
If, after completing the Desktop NanoBoard NB2DSK01 setup and installation procedures, the Devices view shows that the system cannot connect to the NB2DSK01 or cannot detect the presence of an FPGA on the plug-in ... cable (USB or parallel) between the NB2DSK01 and the PC is correctly plugged in at both ends. Check that you have ...
admin - 11/06/2013 - 05:35
-
Desktop NanoBoard NB2DSK01
... legacy - Altium no longer manufactures, nor sells, any of the NanoBoard, Peripheral Board, Daughter Board, or other connected hardware, ... range of FPGA and processor devices High-speed PC interconnection through USB 2.0 that allows faster download and debugging ...
admin - 01/29/2016 - 17:15
-
Troubleshooting NanoBoard 3000 Connection Problems
If, after completing the NanoBoard 3000 setup and installation procedures, the Devices view shows that the system cannot connect to the NanoBoard or cannot detect the presence of its User FPGA, go through the ... the connecting USB cable between the NanoBoard 3000 and the PC is correctly plugged in at both ends. Check that the 'PWR' LED ...
admin - 03/05/2014 - 12:49
-
NanoBoard 3000 Series
... legacy - Altium no longer manufactures, nor sells, any of the NanoBoard, Peripheral Board, Daughter Board, or other connected hardware, ... a LiveDesign-enabled 3000-series NanoBoard transforms your PC desktop into an interactive reprogrammable hardware development system – ...
admin - 01/29/2016 - 17:14
-
Testing the PC to NanoBoard Connection
Once you have connected the NB2DSK01 to your PC, you should check that the system software can also connect to the ...
admin - 09/13/2017 - 15:32
-
Third Party Boards - Indirect Connection using a NanoBoard
If a NanoBoard is available, the third party development board can be indirectly connected to Altium Designer using one of the NanoBoard's User Board headers, as ... 1 shows a Parallel Port connection from the NanoBoard to the PC. For the Desktop NanoBoard NB2DSK01, this connection can also be made using ...
admin - 03/13/2016 - 17:15
-
Troubleshooting NanoBoard 3000 Connection Problems
If, after completing the NanoBoard 3000 setup and installation procedures, the Devices view shows that the system cannot connect to the NanoBoard or cannot detect the presence of its User FPGA, go through the ... the connecting USB cable between the NanoBoard 3000 and the PC is correctly plugged in at both ends. Check that the 'PWR' LED ...
admin - 09/13/2017 - 15:32