Search
Search results
-
Undershoot - Falling Edge
... Unary Summary Specifies the maximum allowable undershoot (ringing above the base value) on the falling edge of the signal. Constraints Default ...
admin - 02/27/2014 - 12:02
-
Undershoot - Falling Edge
... Unary Summary Specifies the maximum allowable undershoot (ringing above the base value) on the falling edge of the signal. Constraints Default ...
admin - 09/13/2017 - 15:32
-
Signal Integrity
... analysis will be performed, using default overshoot/undershoot tolerances and any user-defined signal integrity design rules. ... settles to in the low state. Falling Edge Flight Time The time it takes for the signal ...
admin - 02/17/2014 - 11:05
-
Signal Integrity
... analysis will be performed, using default overshoot/undershoot tolerances and any user-defined signal integrity design rules. ... settles to in the low state. Falling Edge Flight Time The time it takes for the signal ...
admin - 09/13/2017 - 15:32
-
IsRule
... Chain Stub Length Rule, Fanout Control Rule, Flight Time Falling Edge Rule, Flight Time Rising Edge Rule, Layer Pair Rule, Matched ... Style Rule, Test Point Usage Rule, Unconnected Pin Rule, Undershoot Falling Edge Rule, Undershoot Rising Edge Rule, and Vias Under SMD ...
admin - 05/14/2018 - 14:07
-
Signal Integrity Rules
... Reference Signal Stimulus Overshoot - Falling Edge Overshoot - Rising Edge Undershoot - Falling Edge Undershoot - Rising Edge Impedance ...
admin - 03/12/2015 - 03:13
-
Signal Integrity Rules
... Reference Signal Stimulus Overshoot - Falling Edge Overshoot - Rising Edge Undershoot - Falling Edge Undershoot - Rising Edge Impedance ...
admin - 09/13/2017 - 15:32
-
IsRule
... Chain Stub Length Rule, Fanout Control Rule, Flight Time Falling Edge Rule, Flight Time Rising Edge Rule, Layer Pair Rule, Matched ... Style Rule, Test Point Usage Rule, Unconnected Pin Rule, Undershoot Falling Edge Rule, Undershoot Rising Edge Rule, and Vias Under SMD ...
admin - 09/13/2017 - 15:32
-
RuleType
... Chain Stub Length' , 'Fanout Control' , 'Flight Time - Falling Edge' , 'Flight Time - Rising Edge' , 'Height' , 'Hole Size' , ... 'Testpoint Usage' , 'Un-Connected Pin' , 'Un-Routed Net' , 'Undershoot - Falling Edge' , 'Undershoot - Rising Edge' , 'Vias Under ...
admin - 09/13/2017 - 15:32
-
IsRule_Undershoot_FallingEdge
Description Returns Undershoot Falling Edge Rule objects. Syntax IsRule_Undershoot_FallingEdge : Boolean ...
admin - 09/13/2017 - 15:32