Search

Search results

  1. Using Multiple SPI and I2C Devices in a Design

    ... particular board. If your design is to communicate with multiple common-bus SPI (or I2C) devices, you can not simply place the ... integrated library for the type of NanoBoard you are using.   Your design may need to communicate with multiple common-bus ...

    admin - 11/06/2013 - 05:35

  2. Using Multiple SPI and I2C Devices in a Design

    ... particular board. If your design is to communicate with multiple common-bus SPI (or I2C) devices, you can not simply place the ... integrated library for the type of NanoBoard you are using.   Your design may need to communicate with multiple common-bus ...

    admin - 09/13/2017 - 15:32

  3. NanoBoard SPI Communications - Interface Wiring

    ... the pins of the physical FPGA device. Of course, you may be using your own HDL-based controller or, if feeling brave, attempt bit-banging ... may be used in a design. If you wish to communicate with multiple common-bus SPI resources from your design (though not concurrently), a ...

    admin - 11/06/2013 - 05:35

  4. NanoBoard SPI Communications - Interface Wiring

    ... the pins of the physical FPGA device. Of course, you may be using your own HDL-based controller or, if feeling brave, attempt bit-banging ... may be used in a design. If you wish to communicate with multiple common-bus SPI resources from your design (though not concurrently), a ...

    admin - 09/13/2017 - 15:32

  5. PB30 Prototyping Peripheral Board

    ... pad is connected to a 0.5mm hole to allow simple connections using prototyping wire. General purpose area offering 2.54mm (0.1") ... NanoBoard Resources from an FPGA Design Using Multiple SPI and I2C Devices in a Design ...

    admin - 02/10/2014 - 21:46

  6. PB01 Resources - Audio

    ... the device's OUT and SET pins, and is calculated using the following formula: VOUT = 1.25 * (1 + RA/100K) Where, ... If your design involves communications with multiple SPI-based devices, you will need to place the generic SPI_BUS device. ...

    admin - 11/06/2013 - 05:35

  7. NanoBoard 3000 - Serial SPI Flash Memory

    ... can be erased and programmed from within Altium Designer, using the instrument panel for the Host Controller when in normal operating ... If your design involves communications with multiple common-bus SPI devices, you will need to place the generic SPI_BUS ...

    admin - 11/06/2013 - 05:35

  8. NB2DSK01 - ADC-DAC-I2C

    ... converters, both interfaced to the daughter board FPGA using the I2C bus protocol. Figure 1. ADC/DAC and I2C interface. ... If your design involves communications with multiple I2C-compatible devices, you will need to place the generic I2C_BUS ...

    admin - 11/06/2013 - 05:35

  9. NB2DSK01 - ADC-DAC-I2C

    ... converters, both interfaced to the daughter board FPGA using the I2C bus protocol. Figure 1. ADC/DAC and I2C interface. ... If your design involves communications with multiple I2C-compatible devices, you will need to place the generic I2C_BUS ...

    admin - 09/13/2017 - 15:32

  10. NanoBoard 3000 - Serial SPI Flash Memory

    ... can be erased and programmed from within Altium Designer, using the instrument panel for the Host Controller when in normal operating ... If your design involves communications with multiple common-bus SPI devices, you will need to place the generic SPI_BUS ...

    admin - 09/13/2017 - 15:32

Pages

You are reporting an issue with the following selected text and/or image within the active document: