Search

Search results

  1. WB_BOOTLOADER_V2 - Configurable Wishbone Flash SPI Bootloader (Version 2)

    Figure 1. WB_BOOTLOADER_V2 - Configurable Wishbone Flash SPI Bootloader (Version 2) (slave SPI Controller ... Accessible Internal Registers Host to Controller Communications See Also NanoBoard 3000 ...

    admin - 11/06/2013 - 09:09

  2. WB_BOOTLOADER_V2 - Configurable Wishbone Flash SPI Bootloader (Version 2)

    Figure 1. WB_BOOTLOADER_V2 - Configurable Wishbone Flash SPI Bootloader (Version 2) (slave SPI Controller ... Accessible Internal Registers Host to Controller Communications See Also NanoBoard 3000 ...

    admin - 09/13/2017 - 15:32

  3. WB_BOOTLOADER_V2 - Pin Description

    The following pin description is for the WB_BOOTLOADER_V2 when used on the schematic. In an OpenBus System, although the ... are present, the abstract nature of the system hides the pin-level Wishbone interfaces. The external interface signals to the SPI bus will ...

    admin - 11/06/2013 - 09:09

  4. WB_BOOTLOADER_V2 - Pin Description

    The following pin description is for the WB_BOOTLOADER_V2 when used on the schematic. In an OpenBus System, although the ... are present, the abstract nature of the system hides the pin-level Wishbone interfaces. The external interface signals to the SPI bus will ...

    admin - 09/13/2017 - 15:32

  5. WB_BOOTLOADER_V2 - Host to Controller Communications

    Communications between a 32-bit host processor and the WB_BOOTLOADER_V2 are carried out over a standard Wishbone bus interface. For a ...

    admin - 11/06/2013 - 09:09

  6. WB_BOOTLOADER_V2 - Host to Controller Communications

    Communications between a 32-bit host processor and the WB_BOOTLOADER_V2 are carried out over a standard Wishbone bus interface. For a ...

    admin - 09/13/2017 - 15:32

  7. WB_BOOTLOADER_V2 - Operational Overview

    ... NB2DSK01 for example, you could wire this input to the DIP-switch, or one of the generic user switches.   The following steps ... the Receive Data register (RX_DATA), ready to be read by the host processor. Read the appropriate Data register address to retrieve ...

    admin - 09/13/2017 - 15:32

  8. WB_BOOTLOADER_V2 - Operational Overview

    ... NB2DSK01 for example, you could wire this input to the DIP-switch, or one of the generic user switches.   The following steps ... the Receive Data register (RX_DATA), ready to be read by the host processor. Read the appropriate Data register address to retrieve ...

    admin - 11/06/2013 - 09:09

  9. Accessing SPI Flash Memory Attached to a Processor

      The NanoBoard NB2 and 3000-series NanoBoards all feature SPI Flash memory that can be programmed with a ... readily 'see' and 'interact' with the device courtesy of the Host Controller FPGA (NanoTalk Controller). However, when it comes to a ... is performed by having a Flash SPI Bootloader component (WB_BOOTLOADER_V2) in your design. The bootloader component provides the ...

    admin - 01/22/2014 - 17:57

  10. Accessing SPI Flash Memory Attached to a Processor

      The NanoBoard NB2 and 3000-series NanoBoards all feature SPI Flash memory that can be programmed with a ... readily 'see' and 'interact' with the device courtesy of the Host Controller FPGA (NanoTalk Controller). However, when it comes to a ... is performed by having a Flash SPI Bootloader component (WB_BOOTLOADER_V2) in your design. The bootloader component provides the ...

    admin - 09/13/2017 - 15:32

You are reporting an issue with the following selected text and/or image within the active document: