Search
Search results
-
WB_INTERCON - Configurable Wishbone Interconnect
Figure 1. WB_INTERCON - Configurable Wishbone Interconnect. The WB_INTERCON peripheral ... Pin Description Interfacing Configuration See Also WB_DUALMASTER - Configurable Wishbone ...
admin - 11/06/2013 - 09:09
-
WB_INTERCON - Configurable Wishbone Interconnect
Figure 1. WB_INTERCON - Configurable Wishbone Interconnect. The WB_INTERCON peripheral ... Pin Description Interfacing Configuration See Also WB_DUALMASTER - Configurable Wishbone ...
admin - 09/13/2017 - 15:32
-
WB_INTERCON - Configuration
The WB_INTERCON component can be configured after placement on the schematic sheet. Simply right-click and choose the command to configure the device from the pop-up menu that appears (e.g. Configure U_INTERCON_MEM (WB_INTERCON) for a device with designator U_INTERCON_MEM ). Alternatively, ...
admin - 09/13/2017 - 15:32
-
WB_INTERCON - Configuration
The WB_INTERCON component can be configured after placement on the schematic sheet. Simply right-click and choose the command to configure the device from the pop-up menu that appears (e.g. Configure U_INTERCON_MEM (WB_INTERCON) for a device with designator U_INTERCON_MEM ). Alternatively, ...
admin - 11/06/2013 - 09:09
-
Defining the Memory Map for a 32-bit Processor
... an example of the addressable memory and IO space for a 32-bit processor, with a number of memory and peripheral devices mapped into it. ... Interconnect and Wishbone Multi-Master components, see WB_INTERCON - Configurable Wishbone Interconnect and WB_MULTIMASTER - ...
admin - 11/06/2013 - 09:09
-
WB_BOOTLOADER - Interfacing
... The method used to build the design. The main processor-based system can be contained as a separate OpenBus System, which is then ... via a configurable Wishbone Interconnect component (WB_INTERCON). This component is used to simplify connection and also handle the ...
admin - 11/06/2013 - 09:09
-
WB_MULTIMASTER - Pin Description
... is terminated m1_ADR_I I 0-32 (see note 1) Standard Wishbone address bus. Used to select an ... 32 Interrupt signals received from a connected WB_INTERCON Notes All ADR_I buses and the ADR_O bus are ...
admin - 11/06/2013 - 09:09
-
OpenBus Interconnect Component
... The Interconnect component can be used with any of the 32-bit processors supported by, and available for use in, an OpenBus System. ... slave device. In comparison to its counterpart (WB_INTERCON) in the schematic world, the OpenBus System streamlines the use of ...
admin - 11/06/2013 - 09:09
-
WB_BOOTLOADER_V2 - Interfacing
... The method used to build the design. The main processor-based system can be contained as a separate OpenBus System, which is then ... via a configurable Wishbone Interconnect component (WB_INTERCON). This component is used to simplify connection and also handle the ...
admin - 09/13/2017 - 15:32
-
WB_BOOTLOADER_V2 - Interfacing
... The method used to build the design. The main processor-based system can be contained as a separate OpenBus System, which is then ... via a configurable Wishbone Interconnect component (WB_INTERCON). This component is used to simplify connection and also handle the ...
admin - 11/06/2013 - 09:09