Search

Search results

  1. WB_LCDCTRL - Wishbone LCD Controller

    Figure 1. WB_LCDCTRL - Wishbone LCD Controller. The LCD Controller component (WB_LCDCTRL) ...

    admin - 11/06/2013 - 09:09

  2. WB_LCDCTRL - Wishbone LCD Controller

    Figure 1. WB_LCDCTRL - Wishbone LCD Controller. The LCD Controller component (WB_LCDCTRL) ...

    admin - 09/13/2017 - 15:32

  3. WB_LCDCTRL - Host to Controller Communications

    ... takes place when the host processor communicates with the WB_LCDCTRL over the Wishbone interface. Writing Data to the WB_LCDCTRL Data is written from the host ...

    admin - 11/06/2013 - 09:09

  4. WB_LCDCTRL - Host to Controller Communications

    ... takes place when the host processor communicates with the WB_LCDCTRL over the Wishbone interface. Writing Data to the WB_LCDCTRL Data is written from the host ...

    admin - 09/13/2017 - 15:32

  5. WB_LCDCTRL - Pin Description

    The following pin description is for the WB_LCDCTRL when used on the schematic. In an OpenBus System, although the same ... are present, the abstract nature of the system hides the pin-level Wishbone interfaces. The external interface signals will be made ...

    admin - 11/06/2013 - 09:09

  6. WB_LCDCTRL - Pin Description

    The following pin description is for the WB_LCDCTRL when used on the schematic. In an OpenBus System, although the same ... are present, the abstract nature of the system hides the pin-level Wishbone interfaces. The external interface signals will be made ...

    admin - 09/13/2017 - 15:32

  7. WB_LCDCTRL - Operational Overview

    ... frequency of 50 MHz. The Cycle Counter is an internal 7-bit counter used to control transitions between certain states of the FSM. ... The state of the LCD_RW output is dependent on the current Wishbone data cycle – High when reading and Low when writing. Data sent ...

    admin - 11/06/2013 - 09:09

  8. WB_LCDCTRL - Operational Overview

    ... frequency of 50 MHz. The Cycle Counter is an internal 7-bit counter used to control transitions between certain states of the FSM. ... The state of the LCD_RW output is dependent on the current Wishbone data cycle – High when reading and Low when writing. Data sent ...

    admin - 09/13/2017 - 15:32

  9. WB_LCDCTRL_SRAM - Wishbone LCD Controller with Multiplexed Access to SRAM

    Figure 1. WB_LCDCTRL_SRAM - Wishbone LCD Controller, offering additional multiplexed access to SRAM. ...

    admin - 11/06/2013 - 09:09

  10. WB_LCDCTRL_SRAM - Wishbone LCD Controller with Multiplexed Access to SRAM

    Figure 1. WB_LCDCTRL_SRAM - Wishbone LCD Controller, offering additional multiplexed access to SRAM. ...

    admin - 09/13/2017 - 15:32

Pages

You are reporting an issue with the following selected text and/or image within the active document: