Search
Search results
-
WB_MEM_CTRL Configuration - Parallel Flash Settings
When the chosen memory type is Parallel FLASH, the Configure (Memory Controller) dialog will appear as shown in Figure 1. Figure 1. Configuration options when interfacing to Flash memory. The following ... 1 x 8-bit 2 x 8-bit 1 x 16-bit 2 x 16-bit ...
admin - 11/06/2013 - 09:09
-
WB_MEM_CTRL Configuration - Parallel Flash Settings
When the chosen memory type is Parallel FLASH, the Configure (Memory Controller) dialog will appear as shown in Figure 1. Figure 1. Configuration options when interfacing to Flash memory. The following ... 1 x 8-bit 2 x 8-bit 1 x 16-bit 2 x 16-bit ...
admin - 09/13/2017 - 15:32
-
WB_MEM_CTRL - Configuration
... the OpenBus System document – access the dialog by right-clicking over the component and choosing the Configure command from the menu ... Block RAM, or Parallel FLASH. The configuration options presented in the dialog will change in accordance with ...
admin - 11/06/2013 - 09:09
-
WB_MEM_CTRL - Configuration
... the OpenBus System document – access the dialog by right-clicking over the component and choosing the Configure command from the menu ... Block RAM, or Parallel FLASH. The configuration options presented in the dialog will change in accordance with ...
admin - 09/13/2017 - 15:32
-
Whats New in Altium Designer 6.8
... 2D Simple Configurations ( .config_2dsimple), and 3D Configuration ( .config_3d) as shown here. It's worth noting that if you ... The existing configurable Memory Controller component (WB_MEM_CTRL) has been improved to now support connection to Parallel Flash ...
admin - 11/06/2013 - 09:29
-
Whats New in Altium Designer 6.8
... 2D Simple Configurations ( .config_2dsimple), and 3D Configuration ( .config_3d) as shown here. It's worth noting that if you ... The existing configurable Memory Controller component (WB_MEM_CTRL) has been improved to now support connection to Parallel Flash ...
admin - 09/13/2017 - 15:32
-
Release Notes for the Summer 09 release of Altium Designer
... are used. Now the Changing the Layer Colors in The View Configuration dialog will no longer require a forced refresh. When ... - Assign Unconstrained Signals command. The standalone WB_MEM_CTRL core now supports the same timing options for SRAM devices as the ...
admin - 11/06/2013 - 09:29
-
Release Notes for the Summer 09 release of Altium Designer
... are used. Now the Changing the Layer Colors in The View Configuration dialog will no longer require a forced refresh. When ... - Assign Unconstrained Signals command. The standalone WB_MEM_CTRL core now supports the same timing options for SRAM devices as the ...
admin - 09/13/2017 - 15:32