Search
Search results
-
WB_PRTIO - Configurable Wishbone Parallel Port Unit
Figure 1. WB_PRTIO - Configurable Wishbone Parallel Port Unit. The WB_PRTIO is a ... in more detail: Pin Description Configuration Block Diagrams Register Reset Values ...
admin - 11/06/2013 - 09:09
-
WB_PRTIO - Configurable Wishbone Parallel Port Unit
Figure 1. WB_PRTIO - Configurable Wishbone Parallel Port Unit. The WB_PRTIO is a ... in more detail: Pin Description Configuration Block Diagrams Register Reset Values ...
admin - 09/13/2017 - 15:32
-
WB_PRTIO - Configurable Wishbone Parallel Port Unit (AD10)
... an enhanced configurable Wishbone Parallel Port Unit (WB_PRTIO), configuration of which is far more powerful and intuitive. No longer ... bit signal would require just a name (e.g. FLAG ). A 32-bit signal would require a name and a bus index suffix (e.g. FLAG[31..0] ). ...
admin - 11/06/2013 - 09:09
-
WB_PRTIO - 設定できる Wishbone パラレルポートユニット (AD10)
Language WB_PRTIO - Configurable Wishbone Parallel Port Unit (AD10) Altium ... ダイアログの Paste ボタンを使用して Windows ...
admin - 08/23/2019 - 14:29
-
WB_PRTIO - Pin Description
The following pin description is for the WB_PRTIO when used on the schematic. In an OpenBus System, although the same ... are present, the abstract nature of the system hides the pin-level Wishbone interfaces. The external interface signals will be made ...
admin - 11/06/2013 - 09:09
-
WB_PRTIO - Pin Description
The following pin description is for the WB_PRTIO when used on the schematic. In an OpenBus System, although the same ... are present, the abstract nature of the system hides the pin-level Wishbone interfaces. The external interface signals will be made ...
admin - 09/13/2017 - 15:32
-
WB_PRTIO - Configurable Wishbone Parallel Port Unit (AD10)
... an enhanced configurable Wishbone Parallel Port Unit (WB_PRTIO), configuration of which is far more powerful and intuitive. No longer ... bit signal would require just a name (e.g. FLAG ). A 32-bit signal would require a name and a bus index suffix (e.g. FLAG[31..0] ). ...
admin - 09/13/2017 - 15:32
-
WB_PRTIO - Configuration
... System document, or schematic sheet, using the associated configuration dialog (Figure 1). Access to this dialog depends on the document ... the OpenBus System document – access the dialog by right-clicking over the component and choosing the Configure command from the menu ...
admin - 11/06/2013 - 09:09
-
WB_PRTIO - Configuration
... System document, or schematic sheet, using the associated configuration dialog (Figure 1). Access to this dialog depends on the document ... the OpenBus System document – access the dialog by right-clicking over the component and choosing the Configure command from the menu ...
admin - 09/13/2017 - 15:32
-
SCH Inspector
... the editor and click the SCH button at the bottom-right of Altium Designer, and select the SCH Inspector entry from the ... following net labels, associated to the output wiring of a WB_PRTIO component, configured to have four, 8-bit I/O ports: ...
admin - 09/13/2017 - 15:32