Search
Search results
-
WB_SDCARD - Wishbone SD Card Controller
Figure 1. WB_SDCARD - Wishbone SD Card Controller. The Wishbone SD Card Controller component (WB_SDCARD) provides an SPI Master interface, enabling a host processor to efficiently communicate with a Secure Digital (SD) storage ...
admin - 11/06/2013 - 09:09
-
WB_SDCARD - Wishbone SD Card Controller
Figure 1. WB_SDCARD - Wishbone SD Card Controller. The Wishbone SD Card Controller component (WB_SDCARD) provides an SPI Master interface, enabling a host processor to efficiently communicate with a Secure Digital (SD) storage ...
admin - 09/13/2017 - 15:32
-
WB_SDCARD - Host to Controller Communications
Communications between a 32-bit host processor and the WB_SDCARD are carried out over a standard Wishbone bus interface. For a generic ...
admin - 11/06/2013 - 09:09
-
WB_SDCARD - Host to Controller Communications
Communications between a 32-bit host processor and the WB_SDCARD are carried out over a standard Wishbone bus interface. For a generic ...
admin - 09/13/2017 - 15:32
-
WB_SDCARD - Accessible Internal Registers
... The following sections detail the internal registers for the WB_SDCARD that can be accessed from the host processor. Data Register for 8-bit Transfers (DATA8) Address: 000 Access: Read/Write ...
admin - 11/06/2013 - 09:09
-
WB_SDCARD - Accessible Internal Registers
... The following sections detail the internal registers for the WB_SDCARD that can be accessed from the host processor. Data Register for 8-bit Transfers (DATA8) Address: 000 Access: Read/Write ...
admin - 09/13/2017 - 15:32
-
WB_SDCARD - Pin Description
The following pin description is for the WB_SDCARD component when used on the schematic. In an OpenBus System, although ... are present, the abstract nature of the system hides the pin-level Wishbone interfaces. The external interface signals will be made ...
admin - 11/06/2013 - 09:09
-
WB_SDCARD - Pin Description
The following pin description is for the WB_SDCARD component when used on the schematic. In an OpenBus System, although ... are present, the abstract nature of the system hides the pin-level Wishbone interfaces. The external interface signals will be made ...
admin - 09/13/2017 - 15:32
-
WB_SDCARD - Operational Overview
... target SD Card. Initialization You will need to re-initialize the Controller after each external reset. This should be carried ... the Receive Data register (RX_DATA), ready to be read by the host processor. Read the appropriate Data register address to retrieve ...
admin - 11/06/2013 - 09:09
-
WB_SDCARD - Operational Overview
... target SD Card. Initialization You will need to re-initialize the Controller after each external reset. This should be carried ... the Receive Data register (RX_DATA), ready to be read by the host processor. Read the appropriate Data register address to retrieve ...
admin - 09/13/2017 - 15:32