Search
Search results
-
Xilinx Configuration Device - Erasing the Configuration Device
Before programming the configuration device, it is a good idea to clear its memory first. To do this, right-click on its icon in the Hard Devices chain and choose Reset Hard Device ...
admin - 01/23/2014 - 13:39
-
Xilinx Configuration Device - Erasing the Configuration Device
Before programming the configuration device, it is a good idea to clear its memory first. To do this, right-click on its icon in the Hard Devices chain and choose Reset Hard Device ...
admin - 09/13/2017 - 15:32
-
Updating the Firmware on the NanoBoard-NB1
... when the board is powered-up. The NanoBoard-NB1 uses a Xilinx Spartan IIE-100K device (XC2S100E) as the controller for the board. ... to complete. Downloading the New Firmware The configuration for the Xilinx Serial PROM device is stored in a PROM file, using ...
admin - 11/06/2013 - 05:35
-
Updating the Firmware on the NanoBoard-NB1
... when the board is powered-up. The NanoBoard-NB1 uses a Xilinx Spartan IIE-100K device (XC2S100E) as the controller for the board. ... to complete. Downloading the New Firmware The configuration for the Xilinx Serial PROM device is stored in a PROM file, using ...
admin - 09/13/2017 - 15:32
-
TFT LCD Panel - Bootstrapping the Daughter Board FPGA
... depends on the target device: *.bit file for a Xilinx device *.rbf file for an Altera device ... » Project Options ). ConfigurationName is the configuration containing a constraint file that targets the physical FPGA ...
admin - 11/06/2013 - 05:35
-
TFT LCD Panel - Bootstrapping the Daughter Board FPGA
... depends on the target device: *.bit file for a Xilinx device *.rbf file for an Altera device ... » Project Options ). ConfigurationName is the configuration containing a constraint file that targets the physical FPGA ...
admin - 09/13/2017 - 15:32
-
Programming In-System Flash Memory for a Xilinx Spartan-3AN Device
The Xilinx® Spartan™-3AN family of FPGAs feature In-System Flash (ISF) memory. To a design programmed into and running on such a device, this memory is presented as SPI-based serial Flash memory – similar ... with the FPGA's In-System Flash memory can be found on the Configuration Flash sub-menu – accessed by right-clicking on the icon for ...
admin - 11/06/2013 - 05:35
-
Programming In-System Flash Memory for a Xilinx Spartan-3AN Device
The Xilinx® Spartan™-3AN family of FPGAs feature In-System Flash (ISF) memory. To a design programmed into and running on such a device, this memory is presented as SPI-based serial Flash memory – similar ... with the FPGA's In-System Flash memory can be found on the Configuration Flash sub-menu – accessed by right-clicking on the icon for ...
admin - 09/13/2017 - 15:32
-
Programming a Xilinx Configuration Device on the Production Board
... the NanoBoard is no longer possible. To boot the target FPGA device on the Production board with the required design, that design must be programmed into a dedicated configuration device that resides on the board. In order to program the ...
admin - 01/23/2014 - 13:37
-
Programming a Xilinx Configuration Device on the Production Board
... the NanoBoard is no longer possible. To boot the target FPGA device on the Production board with the required design, that design must be programmed into a dedicated configuration device that resides on the board. In order to program the ...
admin - 09/13/2017 - 15:32