Release notes for Altium Designer 10 update (10.545.22410)

4616

Now UNC paths will be able to be used when generating ODB++ outputs.

4905

An Access Violation with message "Access Violation ''View-1687783792'' is not a valid component name at **address*" when trying to select components from the Navigator Panel for very large design will no longer occur.

4494

Flipping a component during move no longer loses the ref point. View BugCrunch report.

4597

The actual height of a component that has a 3D body with a non-zero OffsetHeight is now calculated correctly for DRC. View BugCrunch report.

4717

Changing Mechanical Layer Pairs assignments (add, remove, update Mechanical Layer Pairs) will now mark the PCB Document as Modified.

4738

The "PCB Hole Size Editor" no longer creates multiple entries for the same hole size when old slot hole length is retained after changing the hole type to Round.

4905

An Access Violation with message "Access Violation ''View-1687783792'' is not a valid component name at **address*" when trying to select components from the Navigator Panel for very large design will no longer occur.

2813

IBIS converter tool now supports Model Selector keyword and allows selection of the model within the signal integrity model dialog. View BugCrunch report.

3252

An issue preventing reflection results from being generated for some designs due to generation of a long combined net name has been fixed.

4401

A problem with the list of sch pin in the SI Part Array dialog has been fixed

4465

CAMtastic® Gerber Export will no longer create Gerber files that can't be loaded back into CAMtastic® correctly when using RS274X format & Incremental coordinate data.

4497

CAMtastic® ODB++ import for embedded board arrays will no longer reset the drill layer pairs for some of the child boards if any of the arrays is mirrored.

4577

Allegro Gerber files containing nested polygons will now load correctly in CAMtastic®.

4581

CAMtastic® "One or More Layer Types are duplicated/not defined!" information dialogue will no longer be stuck in an infinite loop if the user clicks the "No" button.

4619

CAMtastic® Gerber loader will no longer discard OrCAD Gerber files that use M2* command instead of M02* for marking the end of the file.

4481

After pasting a component to the Sch Library panel, the component will now be selected and focused. View BugCrunch report.

4587

Shift click now enters inplace edit of selected text object when Shift Click to Select preference is enabled. View BugCrunch report.

4905

An Access Violation with message "Access Violation ''View-1687783792'' is not a valid component name at **address*" when trying to select components from the Navigator Panel for very large design will no longer occur.

1377

The Messages panel now opens on HDL simulation error.

1479

Cross probing in the Messages panel is now supported when running HDL simulation with the Aldec OEM simulator.

3063

Actel Libero/Designer 9.1 is now supported.

4922

Timing constraints are now properly passed to Actel Designer while using Synplify or Synplify For Actel.

4923

Rebuilding a project in the Devices View is now waiting for Synplify For Actel to be closed in order to avoid missing or corrupted files to be processed by Actel Designer.

4928

The FPGA_DELAY_MAX, FPGA_DELAY_MAX_FROM and FPGA_DELAY_MAX_TO constraints are no longer set with incorrect values for bus signals.

3501

Some components from the FPGA Configurable Generic and the FPGA Instruments libraries (including FIFO and LAX) are no longer failing while using Synplify or Synplify for Actel.

4632

Some components from the FPGA Generic library are no longer causing the FPGA flow to fail because they have the same name as an Actel Macro while targeting Actel IGLOO devices.

3315

FPGA flow is no longer failing because of missing pre-synthesized modules for components from the FPGA Generic library while targeting an Actel IGLOO nano device.

4835

ODB++ Output will now export Signal Layer Polygon Regions to corresponding ODB++ nets in case they are part of any PCB nets. View BugCrunch report.