Modified by Admin on Dec 5, 2013
Update 22: Updated plug-ins from release 10.1181.24817 to 10.1271.26245
Date: 19 October 2012
Key highlights
Incremental Unroute
We have included a new feature in PCB Editor for deleting of selected objects (through the shortcut keys Ctrl+Delete), which then selects adjacent routed objects for further unrouting. When single end-of-route object is selected, Backspace shortcut now deletes selection and auto-selects connected singular route object. Each of these shortcuts can be used in a successive manner to incrementally unwind routed paths. View BugCrunch report #916. View wiki info.
New module for output of IDF
This release has the addition of a new plugin “Output - IDF” found in the Output Generators category. This new plugin provides IDF export capability in the OutJob “Export Outputs” section. View BugCrunch report #1363. View wiki info.
Updated FPGA device and vendor tools support
Xilinx ISE v14.2 and Lattice Diamond 2.0 are now supported.
Ultra and micro fineline ball grid array (UBGA & MBGA) devices have been added to the Altera Cyclone4E Nexus driver.
System Components: Altium Designer Base
System Components: Altium Designer Localization
| 6204 | Traditional Chinese localization of Altium Designer has been updated. |
| 6387 | Japanese localization of Altium Designer has been updated. |
| 6388 | Simplified Chinese localization of Altium Designer has been updated. |
System Components: PCB System
| 5922 | The interactive router option Allow Diagonal Pad Exits now works correctly for surface mount pads. |
| 6373 | PCB Tools >> Reannotate now allows the start index to be set. |
| 6413 | Fixed Interactive Diff-Pair router crash that would cause PCB to hang. |
| 5504 | Fixed slow response/hang when dragging a track near very large keepout arcs. |
| 6494 | Fixed problem with Copy Room Formats that would cause tracks in the room to not have their net assignment updated correctly after the copy. |
| 6527 | Fixed bug in Copy Room Format where vias sometimes would not be copied. |
| 6432 | PCB Editor Ctrl+Delete shortcut now deletes selection and auto-selects all route objects connected to deleted ones. When single end-of-route object is selected, Backspace shortcut now deletes selection and auto-selects connected singular route object. View BugCrunch report #916. |
System Components: Schematic Support
System Components: Schematic System
| 6360 | Place full circle is now available in Schematic: Place >> Drawing Tools >> Full Circle. View BugCrunch report #1050. |
| 6391 | Images in schematic document can be rotated now. |
System Components: Soft Design Support
System Components: Soft Design System
| 6407 | Lattice Diamond version 2.0 is now supported. |
| 6403 | Xilinx ISE 14.2 is now supported. |
| 6374 | Ultra and micro fineline ball grid array (UBGA & MBGA) devices have been added to the Altera Cyclone4E Nexus driver. |
System Components: Cyclone4E
| 6374 | Ultra and micro fineline ball grid array (UBGA & MBGA) devices have been added to the Altera Cyclone4E Nexus driver. |
FPGA Components: Instrument - Logic Analyser
Importers and Exporters: Exporter - IDF
Importers and Exporters: Importer - IDF
Importers and Exporters: Importer - Allegro
| 5716 | Allegro Importer into PcbDoc now detects objects of Class "Constraint Region" and imports them as Mechanical 1 layer outlines. |
Output Generators: Output - AdvSim
Output Generators: Output - Gerber
| 6405 | Gerber flashes are now created correctly for solder/paste mask features created automatically (from solder/mask expansion properties) for fills, tracks and arcs when mirrored Embedded Board Arrays are used. |
Output Generators: Output - IDF (New Module)
| 6385 | Added a new module "Output - IDF' to supply IDF Exporter capability in the OutJob "Export Outputs" section. View BugCrunch report #1363. |
Development updating various modules
The development made for the following tickets required changes to our Run Time Libraries, and as a result require majority of the modules to be updated.
| 6281 | Auto-increment will now increment trailing numbers that are preceded by a period "." or hyphen "-" for Smart Paste, shift-duplication, designators while placing parts, pins, components, pads, and for SchLib Component Rule Check. View BugCrunch report #1503. |
| 6406 | Internal memory options for FPGA LAX have been extended to support 8K, 16K, 32K and 64K entries. View BugCrunch report #1457. |
| 4583 | A run-time error (wbtc.exe) dialog no longer pops up during the build flow while multiple versions of Xilinx ISE have been installed on the same computer. |